Anyone with desktop dyno?
Thread Starter
Senior Member
iTrader: (1)
Joined: Jul 2005
Posts: 624
Likes: 0
From: SW Michigan
Car: '88 G T/A
Engine: L98
Transmission: 700R4
Axle/Gears: 3.27 9 Bolt
Anyone with desktop dyno?
Was wondering if anyone could entertain my curiosity in desktop dyno and try out my setup? Would be much appreciated 
My setup:
L98 350 stock bottom end
9.3:1 CR (64cc L98 heads)
Heads have bowl work and port work.
Stock valves (190s and 150s I think?)
Cam is ZZ4 w/ 1.5ratio exhaust and 1.6intake making the specs:
Duration @ 0.050" Lift: 208/221
Lift: .505"/.510"
Lobe Separation: 112
Intake is ported TPI base, SLP runners and matched ported plenum, stock TB w/ airfoil. AFPR @ 50psi w/ 22lb inj
Let me know if you need any other info.
Thanks for your time.
Matt
My setup:
L98 350 stock bottom end
9.3:1 CR (64cc L98 heads)
Heads have bowl work and port work.
Stock valves (190s and 150s I think?)
Cam is ZZ4 w/ 1.5ratio exhaust and 1.6intake making the specs:
Duration @ 0.050" Lift: 208/221
Lift: .505"/.510"
Lobe Separation: 112
Intake is ported TPI base, SLP runners and matched ported plenum, stock TB w/ airfoil. AFPR @ 50psi w/ 22lb inj
Let me know if you need any other info.
Thanks for your time.
Matt
Thread
Thread Starter
Forum
Replies
Last Post
darwinprice
Organized Drag Racing and Autocross
17
Oct 11, 2015 11:51 PM
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM