Spark Plug Reach
Thread Starter
Supreme Member
Joined: Mar 2005
Posts: 1,446
Likes: 1
From: Red Lion, PA
Car: 91 Camaro RS, 99 Camaro Z28
Engine: L03, LS1
Transmission: 700R4, T56
Axle/Gears: bunch of 10 bolts how scary is that
Spark Plug Reach
I have spark plugs that are .480 reach. When I screw them into my alum heads there go about flush with the combustion chamber. Should it stick out abit into the combustion chamber? (I have the heads in my lap lol there not in the car thats how I know how deep it is in it lol.)
Whats the recommended reach for a 305 TBI as well?
Whats the recommended reach for a 305 TBI as well?
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Many of the aluminum heads use a 3/4" reach gasketed plug. Such as an Autolite 3924.
The threaded portion of the plug should be flush with the chamber surface.
RBob.
The threaded portion of the plug should be flush with the chamber surface.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post