601 heads or?
Thread Starter
Member
Joined: Aug 2005
Posts: 108
Likes: 0
From: ALta, Ca
Car: 1975 IHC Scout II
Engine: 1967 Buick 340 with TBI
Transmission: 700R4
601 heads or?
I'm on a quest for 13's. With TBI. So far, i have a 350 vortec short block, vortec cam, with stock 193 heads. TPI fuel pump, Full header back 3" exhaust, 700r4 with 2000rpm stall, 3.27 posi on 245-50's. Stock computer. Best of 14.84 at 90MPH, with a nice 1.96 60foot. Lots of bottom end.
So, Computer work is a given, im getting the EBL first, and learning to tune. And i have a good pair of 601 heads, that have had a start on port work. I know they'll bump my compression a bit. Will those heads, even with the small valves, be ok for 13's? And what about cam? keep the vortec cam, go LTI, or ??
So, Computer work is a given, im getting the EBL first, and learning to tune. And i have a good pair of 601 heads, that have had a start on port work. I know they'll bump my compression a bit. Will those heads, even with the small valves, be ok for 13's? And what about cam? keep the vortec cam, go LTI, or ??
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
Jan 18, 2016 08:00 AM
