hey guys,

I took my cruise control module from my 91 TA and put it in my 92 GTA today. The module has 2 vacuum lines going to it, a 1/4 and a 5/32. The 5/32 one is a T... besides the hose feed and the hose going into the cruise control, where does the other vacuum line go?

I'm assuming this is a yes, but do both vacuum lines actually need perfect vacuum for cruise control to work?

also, I had to splice the 5 wires into my electrical system. with the key on and the cruise control switch on, do you guys know either voltage or resistance values I should be getting across each wire?

Thanks in advance

 

If i can remember when I yanked mine, one line went to the switch on the brake pedal with all the wires, and the other went to the motor.