Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

i did a good job of getting nothing done

Thread Tools
 
Search this Thread
 
Old Aug 15, 2007 | 05:08 PM
  #1  
biggreg88's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 3
Likes: 0
i did a good job of getting nothing done

I little while ago i noticed that there was a loud ticking noise that was coming from the passangers side twards the back, the sound went along with the throttle so in other words it didint disapear when i got on the gas. I went home and parked it. the next day i took off the valve covers and noticed that my rockers were extremely loose, i had a mechanic come over and help me adjust them. we got the ticking to stop but it still ran very uneven and the whole car shakes, i put it all back together which, as usual, was a royal pain in the a$$ and the ticking is back and the shakeing is worse

i had good oil pressure this whole time
i havent changed the plugs and i doubt they have been changed for a while, like 5 years

what do i do now, stop being a do it yourselfer?
Reply
Old Aug 15, 2007 | 05:10 PM
  #2  
92RS(real slow)'s Avatar
Supreme Member
15 Year Member
 
Joined: Sep 2005
Posts: 2,151
Likes: 0
From: Osceola Indiana
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
Re: i did a good job of getting nothing done

wellit could very well be the plugs if they havent been changed in over 5 yrs, ticking noise is kinda strange though not really sure
Reply
Old Aug 15, 2007 | 05:15 PM
  #3  
biggreg88's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 3
Likes: 0
Re: i did a good job of getting nothing done

it might be the plugs but it was driving fine then all of a sudden it wasent
Reply
Old Aug 15, 2007 | 05:39 PM
  #4  
Apeiron's Avatar
Moderator
 
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: i did a good job of getting nothing done

I'd be finding out why the rockers are suddenly getting loose. How many cylinders is it happening on?
Reply
Old Aug 15, 2007 | 10:06 PM
  #5  
biggreg88's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2007
Posts: 3
Likes: 0
Re: i did a good job of getting nothing done

its happened on all 8 cylinders
Reply
Old Aug 15, 2007 | 11:16 PM
  #6  
Toehead's Avatar
Supreme Member
 
Joined: Jul 2005
Posts: 2,123
Likes: 0
From: North Central Mass.
Car: 1985 Berlinetta
Engine: Megasquirted TPI
Transmission: Transgo 700R4
Axle/Gears: 3.42
Re: i did a good job of getting nothing done

I can't imagaine all 8 lobes wiping at once.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Thornburg
Transmissions and Drivetrain
10
Aug 25, 2015 01:46 AM
neekolzun
Body
32
Aug 24, 2015 04:59 PM
Out-Cast
Tech / General Engine
5
Aug 17, 2015 10:57 AM
86White_T/A305
LTX and LSX
0
Aug 17, 2015 12:16 AM




All times are GMT -5. The time now is 01:43 PM.