I have a 1991 camaro Z28 with a 350 TPI engine and i recently did alot of work on it and am now having alot of problems getting the car to run right. Also sometime the car's exhaust smokes a blueish smoke. I don't know a ton about cars but i know alot more than the average person. I have the engine rebuild and the Mods i did to the engine internally are it's bored .30 over, it has a slighty bigger cam, and ported heads. On the intake side i bought TPIS mini ram intake, and a 58mm holley throttle body. For the exhaust i bought shorty hooker comp headers, and a high flow magnaflow cat and muffler. Also I bought all new injects and a holley fuel pump, and i had a chip burned by TPIS to match the cam specs. I attached a copy of the dyno sheet, and just by looking at it you can clearly see there is something wrong going on. If you have any ideas what the problem might be let me know.
Thanks,
Jonathan
https://www.thirdgen.org/forums/attachments/tpi/147146d1195506011-tuning-problems-dyno.jpg If it doesnt work by clicking it you may have to copy and paste it in you browser window