HP ESTIMATE AND LIFTER QUESTION
Thread Starter
Junior Member
Joined: Feb 2006
Posts: 80
Likes: 0
HP ESTIMATE AND LIFTER QUESTION
355 CI FLAT TOP PISTONS 4 VALVE RELIEF 9.75 COMPRESSION, LUNATI VOODOO CAM 227/233-489/504, VORTEC 906 PERFORMANCE HEADS 550 LIFT SPRINGS PRO PRODUCTS AIR GAP VORTEC CROSSWIND MANIFOLD DUAL PLANE, GASKET MATCHED,HEI, 750DP HOLLEY CARB,1" SPACER, STEEL ROLLER VORTEC 1.5 ARMS. AND ON THE LIFTERS WHICH WERE PURCHASED USED ALONG WITH THE CAM WHICH HAD ONLY DYNO TIME ON BUT WERE NOT MARKED AS TO WHAT HOLE THEY WERE TAKEN OUT OF, SHOULD I USE THEM OR JUST BUY NEW LIFTERS, ALSO 4 OF THE LIFTERS HAVE SLIGHT USE CIRCLES ON THEM THOUGHTS ??
Supreme Member
Joined: Jul 2005
Posts: 1,675
Likes: 3
From: Arab, Alabama
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Re: HP ESTIMATE AND LIFTER QUESTION
355 CI FLAT TOP PISTONS 4 VALVE RELIEF 9.75 COMPRESSION, LUNATI VOODOO CAM 227/233-489/504, VORTEC 906 PERFORMANCE HEADS 550 LIFT SPRINGS PRO PRODUCTS AIR GAP VORTEC CROSSWIND MANIFOLD DUAL PLANE, GASKET MATCHED,HEI, 750DP HOLLEY CARB,1" SPACER, STEEL ROLLER VORTEC 1.5 ARMS. AND ON THE LIFTERS WHICH WERE PURCHASED USED ALONG WITH THE CAM WHICH HAD ONLY DYNO TIME ON BUT WERE NOT MARKED AS TO WHAT HOLE THEY WERE TAKEN OUT OF, SHOULD I USE THEM OR JUST BUY NEW LIFTERS, ALSO 4 OF THE LIFTERS HAVE SLIGHT USE CIRCLES ON THEM THOUGHTS ??
Unless those are roller lifters, ya gotta toss 'em.
...and stop typing in all caps. People will think you're an AOL user.
Thread
Thread Starter
Forum
Replies
Last Post
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
