Intake Manifold issue
Thread Starter
Senior Member
Joined: Dec 2003
Posts: 758
Likes: 1
From: Ontario, Canada
Car: 1988 Pontiac Trans Am
Engine: 5.0L Fuel Injection
Transmission: Automatic 4speed /w OVerdrive
Intake Manifold issue
Hello,
We are doing a 350 swap on my car however the 350 came from a carb'd car. I am going to be sticking with the TBI setup as I am more familliar with tuning a TBI than messing with a carb.
The problem is. The intake manifold off of my 305 TBI will not bolt to the 350 block. The intake manifold for the 305 has angled bolts that bolt to the heads where the 350's manifold mounts are right into the block. Is there something I can do to rectify this? Looking for a cheap solution. Let me know
We are doing a 350 swap on my car however the 350 came from a carb'd car. I am going to be sticking with the TBI setup as I am more familliar with tuning a TBI than messing with a carb.
The problem is. The intake manifold off of my 305 TBI will not bolt to the 350 block. The intake manifold for the 305 has angled bolts that bolt to the heads where the 350's manifold mounts are right into the block. Is there something I can do to rectify this? Looking for a cheap solution. Let me know
TGO Supporter
Joined: Oct 2002
Posts: 9,067
Likes: 1
From: Saskatoon, SK, Canada
Car: '83 Z28, '07 Charger SRT8
Engine: 454ci, 6.1 Hemi
Transmission: TH350, A5
Axle/Gears: 2.73 posi, 3.06 posi
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Member
Joined: Jul 2007
Posts: 137
Likes: 0
From: Minneapolis, MN
Car: '86 Iroc Z
Engine: 305 TPI
Transmission: 700r4
Re: Intake Manifold issue
Keep it carb'd man... Pop a four barrel on there and it beats a TBI setup any day. It's probably more simple than TBI, too, especially since it's already on the motor.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
Apr 25, 2016 09:21 PM