ZZ4 cam
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2006
Posts: 38
Likes: 0
From: Orange Park Florida
Car: 87 iroc camaro/2000 Z71/S-10 LB9TPI
Engine: L98
Transmission: 700r4
Axle/Gears: 327
ZZ4 cam
I have a ZZ4 i bought from a friend that i am putting a LPE 219 cam into along with some other mods.I pulled the ZZ4 cam and i want to verify its actually the ZZ4 cam. The numbers etchecd on the cam end are 32698R along with 871 WB23. This is obviously some sort of GM code can anyone help verify. I want to sell it but i don't want to mis represent it he's positive his dad didn't change the cam since it was a brand new crate motor when he installed it. For piece of mind i'd like to know. From what i can find in the book the gmpp part number is 10185071 but thats nowhere on the cam itself. All help always appreciated.
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
It that "871" or "071"?
The last three digits of the p/n should be stamped on the end of the cam.
The last three digits of the p/n should be stamped on the end of the cam.
Last edited by five7kid; Oct 26, 2008 at 08:43 PM.
Thread Starter
Junior Member
iTrader: (1)
Joined: Feb 2006
Posts: 38
Likes: 0
From: Orange Park Florida
Car: 87 iroc camaro/2000 Z71/S-10 LB9TPI
Engine: L98
Transmission: 700r4
Axle/Gears: 327
Re: ZZ4 cam
oops! its 071 which is the last three in the gmpp catalog. Thanks for the heads up!
Thread
Thread Starter
Forum
Replies
Last Post
