Fuel Pump Location?
Thread Starter
Junior Member
Joined: May 2008
Posts: 26
Likes: 0
From: Florida
Car: 1990 Firebird / 1999 Eclipse
Engine: 3.1 v6 / DOHC 2.0
Transmission: Automatic / 5 Speed Manual
Fuel Pump Location?
I have to replace my fuel pump and instead of dropping the axel and tank I'm going to cut through from the inside.
Anyone out there that's done this before?
Tell me about it
Anyone out there that's done this before?
Tell me about it
Junior Member
Joined: Dec 2006
Posts: 70
Likes: 0
From: Venice,Fl
Car: 89 Firebird Formula
Engine: 350
Re: Fuel Pump Location?
http://www.turbobuick.com/forums/tur...utes-less.html
Here is the link I used when I changed mine had it done in and hour...Hope this Helps..
Here is the link I used when I changed mine had it done in and hour...Hope this Helps..
Supreme Member
iTrader: (28)
Joined: Jul 2006
Posts: 1,564
Likes: 2
From: ocklawaha FL.
Car: 81z-28,89gta,91z-28 03 1500
Engine: 355,L98vette tpi,327
Transmission: TH350/700R4/700r4/4l80E
Axle/Gears: 3;73/3;27/2;73/3;73
Re: Fuel Pump Location?
hey! let me first say welcome to TGO BthomasM!
And to you Prdnjoy,that ecm still holding up? (sorry but my car is still sporting the black/grey combo!) I kinda like it.
anyways,back to topic! I've never been a fan of the hack job fuel pump access hole but that link Prdnjoy posted looks pretty CLEAN!
And to you Prdnjoy,that ecm still holding up? (sorry but my car is still sporting the black/grey combo!) I kinda like it.
anyways,back to topic! I've never been a fan of the hack job fuel pump access hole but that link Prdnjoy posted looks pretty CLEAN!
Last edited by TIMMYS89GTA; Dec 17, 2008 at 08:07 PM.
Banned
iTrader: (12)
Joined: Jul 1999
Posts: 12,212
Likes: 13
From: Bertram (outside Austin), TX
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: Fuel Pump Location?
This topic is covered WEEKLY.To pull the pump out, you'll hafta find a way to cut the hard fuel lines & then reconnect them, without them leaking. For carb &TBI engines, that is easy...low pressure TPI uses a higher pressure,which is harder to seal.
Thread Starter
Junior Member
Joined: May 2008
Posts: 26
Likes: 0
From: Florida
Car: 1990 Firebird / 1999 Eclipse
Engine: 3.1 v6 / DOHC 2.0
Transmission: Automatic / 5 Speed Manual
Trending Topics
Junior Member
Joined: Dec 2006
Posts: 70
Likes: 0
From: Venice,Fl
Car: 89 Firebird Formula
Engine: 350
Re: Fuel Pump Location?
And to you Prdnjoy,that ecm still holding up? Tim all is Great can't Thank You enough..(sorry but my car is still sporting the black/grey combo!) I kinda like it.(Did I ever tell you it would be SHARP black on black)
anyways,back to topic! I've never been a fan of the hack job fuel pump access hole but that link Prdnjoy posted looks pretty CLEAN!
As for Hack Job it come out beautiful I used a tubbing cutter didnt crimp lines at all..Buy the way Tim that is on a new car I purchased a 1991 Firebird v-6 had to replace fuel pump (I havent posted that car to this site)
BThomas pics would be nice.
anyways,back to topic! I've never been a fan of the hack job fuel pump access hole but that link Prdnjoy posted looks pretty CLEAN!
As for Hack Job it come out beautiful I used a tubbing cutter didnt crimp lines at all..Buy the way Tim that is on a new car I purchased a 1991 Firebird v-6 had to replace fuel pump (I havent posted that car to this site)
BThomas pics would be nice.
Thread
Thread Starter
Forum
Replies
Last Post
AkDrifted
Engine/Drivetrain/Suspension Parts for Sale
6
Aug 17, 2015 07:45 PM
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM
1989, 1990, 89firebird, access, camaro, feul, firebird, formula, fuel, gen, instructions, located, location, pump, replacement
