The Right Cam? Please Help
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 27
Likes: 0
From: Powhatan, Va.
Car: 92 Camaro RS
Engine: 305
Transmission: 700r4
Axle/Gears: stock
The Right Cam? Please Help
Hello to all, I am in the process of doing a 92RS 305 TBI to a TPI.
My car was bought new. The oil was changed @ 3000 miles, has
165.454 on the motor. Motor is sound with no smoke,etc. Being
this far into it thought I would change the Timing chain, water
pump, etc. My question is with a stock ECM what cam should I
buy? I am going with headers also.
My car was bought new. The oil was changed @ 3000 miles, has
165.454 on the motor. Motor is sound with no smoke,etc. Being
this far into it thought I would change the Timing chain, water
pump, etc. My question is with a stock ECM what cam should I
buy? I am going with headers also.
Supreme Member
iTrader: (3)
Joined: Nov 2001
Posts: 2,428
Likes: 2
From: Fairview Heights Illinois
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: The Right Cam? Please Help
The stock camshaft from the 88-89 L98 engine looks like a pretty good one.
http://temp.corvetteforum.net/c4/vader86/cam.html
CAM 88-89 L98 10066049 In/Exh Dur@.050" 207'/213' Lift (w/1.5) .415"/.430" LobSep 117'
http://temp.corvetteforum.net/c4/vader86/cam.html
CAM 88-89 L98 10066049 In/Exh Dur@.050" 207'/213' Lift (w/1.5) .415"/.430" LobSep 117'
Thread Starter
Junior Member
Joined: Jan 2009
Posts: 27
Likes: 0
From: Powhatan, Va.
Car: 92 Camaro RS
Engine: 305
Transmission: 700r4
Axle/Gears: stock
Re: The Right Cam? Please Help
Thank you 305sbc, where would one find that cam & does it have enough duration
to give some sound in the headers?
to give some sound in the headers?
Thread
Thread Starter
Forum
Replies
Last Post
