Hello I think I am close can someone help? I have this info as my upper intake
6263751 72 350-175HP, 200HP, Corvette, Camaro, Chevelle, Monte Carlo, Nova CI, 7MV = My upper intake info ? My question is can it go on a 350 and a 305 block?

also
14010207 350 2 or 4 80-85 = this could be block info? but my block only has the 10207 not the full 14010207 is this the same thing?


14079261 350, 86 = this could be 350 head info?
this was on the inside of my valve cover on the head


DO I HAVE A 350 or a 305???????

Any help would be great

 

Heads and intake mean nothing to displacement since they can be installed on any engine. Based on the block casting number, it looks like you have a 350.

 

thanks for your info I was unsure but that is what I thought as well. I know the enigine is not from the car so the cating by the water pump with the vin is to another car or truck. It also has a CE on the water pump mount plate is that a CRATE ENGINE resale or reman? If it is a CE it is hard to determine where its from right?

 

Pull the stamped numbers off the pad in front of the passenger side head.

 

I di the pad has a CE which I found out could be a crate engine replacement or over the counter sell. Then it has the following numbers as well 4151895 and then this I think its the date code v1411frt. does that mean v= flint 04 =april 11-day and then FRT engine code but I can not find a FRT engine code at all? Some of the casting numbers are leading me to believe that is t a 305 and then some are like that of a 350? does this help?