Which plugs?
Thread Starter
Junior Member
Joined: Feb 2009
Posts: 33
Likes: 0
From: Carey, OH
Car: '84 Z28
Engine: 383 Stroker
Transmission: T-5
Axle/Gears: 3.73
Which plugs?
Well I can see the light at the end of the tunnel on my winter project and now I have a question that i was hoping someone on here with experience on the issue. Anyway I've built a 383 and was wondering what kind of plugs I should run? I'm planning on asking the guy who did my machine work to see what his opinion but I figured hearing more than one opinion can't hurt anything.
Moderator
iTrader: (1)
Joined: Mar 2002
Posts: 18,432
Likes: 233
From: Chasing Electrons
Car: check
Engine: check
Transmission: check
Re: Which plugs?
Most important is which heads are on the 383. Different heads have different requirements for the form-factor of the splugs (reach, seat, ...).
Other then that I use the standard Autolite or AC Delco plug. Nothing fancy required.
RBob.
Other then that I use the standard Autolite or AC Delco plug. Nothing fancy required.
RBob.
Thread
Thread Starter
Forum
Replies
Last Post
wigmobile
Electronics
5
Feb 26, 2025 02:56 PM
89 formula TPI
Tech / General Engine
10
Sep 7, 2015 11:06 AM