Inertia Switch?
#1
Junior Member
Thread Starter
Join Date: Apr 2009
Location: Murfreeseboro, Tennessee
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 Camaro RS
Engine: 3.1
Inertia Switch?
My fuel Pump on a 1990 camaro Rs will not kick on. New pump, and new relay so only other thing i can think of is a inertia switch. Does anyone know if that car has 1 and if so were is it located.
#2
Member
Join Date: Feb 2009
Location: Delta, BC
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 S10 Blazer
Engine: TBI 350
Transmission: 700R4
Axle/Gears: 3.73 posi
Re: Inertia Switch?
Inertia switches are a F*rd thing.
Anyhow - check the power wire all the way to the back. If you've got power on the (pink? damn - not looking a dwg) wire at the back, then check the ground. Does your fuel gauge read right? They share a ground.
I've had a case where the fuel pump power wire was actually broken INSIDE the insulation! Took me forever to track that one down, since everything LOOKED like it was OK. Kept probing the wire every foot or so with a fine pin. Eventually the power disappeared, and I just worked my way back. Good tug on the wire, and it snapped in two.
Anyhow - check the power wire all the way to the back. If you've got power on the (pink? damn - not looking a dwg) wire at the back, then check the ground. Does your fuel gauge read right? They share a ground.
I've had a case where the fuel pump power wire was actually broken INSIDE the insulation! Took me forever to track that one down, since everything LOOKED like it was OK. Kept probing the wire every foot or so with a fine pin. Eventually the power disappeared, and I just worked my way back. Good tug on the wire, and it snapped in two.
Thread
Thread Starter
Forum
Replies
Last Post
Randomtask2
Interior Parts for Sale
5
09-10-2015 08:37 AM