Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Code 44

Thread Tools
 
Search this Thread
 
Old 03-11-2010, 01:45 AM
  #1  
Junior Member
Thread Starter
 
Rob00158's Avatar
 
Join Date: Jan 2010
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Code 44

Hi guys,

1988 5.7 TPI Iroc Z

I'm in the UK and I get a code 44 most of the time after about 5 minutes of driving. When I'm stopped at a red light the ses light goes off but when I get back up to cruising speed the ses light comes back on again. Sometimes it won't come on at all?? Performance is good, no hesitation, misfiring etc.

I'll change the fuel filter this weekend and buy a fuel pressure tester and check for the obvious melted wire / leaks etc. It just drives me mad that its so random and intermittent. I like things to either work or break lol.

Any ideas or shall I just work through the possibilites one by one?
Old 03-11-2010, 02:28 AM
  #2  
Supreme Member
iTrader: (2)
 
skirkland1980's Avatar
 
Join Date: Jul 2009
Location: morrow, ga
Posts: 1,354
Likes: 0
Received 4 Likes on 4 Posts
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: Code 44

have you used any racing gas lately? leaded fuel?
Old 03-11-2010, 02:41 AM
  #3  
Junior Member
Thread Starter
 
Rob00158's Avatar
 
Join Date: Jan 2010
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Re: Code 44

I haven't but i've not owned the car for long, pervious owner had pulled the ses bulb so must have been doing it for a while. It had a new MAF sensor a couple of years ago. It's completely stock with it's air pump and egr etc so at least i'm not trying to undo anything a previous owner could have done to cause it?
Old 03-11-2010, 02:47 AM
  #4  
Supreme Member
iTrader: (2)
 
skirkland1980's Avatar
 
Join Date: Jul 2009
Location: morrow, ga
Posts: 1,354
Likes: 0
Received 4 Likes on 4 Posts
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: Code 44

you seem to know what to do already. check fuel pressure, fuel filter, vac leaks. wouldn't hurt to clean the maf with some electrical cleaner. you can remove an 02 sensor and see if its white and powdery.
Old 03-11-2010, 02:54 AM
  #5  
Junior Member
Thread Starter
 
Rob00158's Avatar
 
Join Date: Jan 2010
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Re: Code 44

So if it's white and powdery that means it's running lean?
Old 03-11-2010, 03:06 AM
  #6  
Supreme Member
iTrader: (2)
 
skirkland1980's Avatar
 
Join Date: Jul 2009
Location: morrow, ga
Posts: 1,354
Likes: 0
Received 4 Likes on 4 Posts
Car: 82 S10, 83 280ZX, 84 Z28
Engine: 355 smallblocks..na, 2.8 turbo
Transmission: 85:th350, 84:700R4
Axle/Gears: 85:ford9 4.85, 84:stock 3.24
Re: Code 44

usually means leaded fuel was used. will need to replace it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89-IROCZ-5.0TPI
TPI
10
02-22-2022 09:26 PM
Falcon50
DFI and ECM
81
08-22-2020 03:26 PM
racereese
Tech / General Engine
14
10-03-2015 03:46 PM
Luigytico09
TPI
0
10-01-2015 08:46 AM
dusterbd
TPI
0
09-29-2015 08:40 AM



Quick Reply: Code 44



All times are GMT -5. The time now is 07:46 PM.