how do i remove all of it their are alot of vacume lines over there and im kindof confused

 

Disconnect the cable to the TB , plug the vac line that comes from the intake and remove everything else that is connected to There is a vac line that runs through the firewall to the brake switch

 

no theres a vacume line coming from the intake then one going from the cruise somewhere else i cant tell though. does anyone have a vacume diagram

 

vacuum diagrams you wanted sorry they might be hard to read

 

Did you read what I wrote above?
A vac source from the intake and a vac release line through firewall to brake switch
The vac source line should be T'ed of the line from intake to vac canister

 

do i need to plug the large vacume line that goes to the brake switch through the firewall. i did read just didnt really understand and wanted to see where everything geos to

 

Just pull the T connecting the vacuum from the intake and get a connector that only connects the intake to the vacuum canister. If you want to pull the hose going into the fire wall also like I did then do so, cap the vacuum line under the dash, and get a 1 1/2 inch hole plug and insert in hole in firewall. rest should be common sense.