Help me ID this Cam. Lazer?
09-04-2010, 02:24 AM
#1
Senior Member
Thread Starter
iTrader: (5)
Join Date: Sep 1999
Location: Kansas City, MO
Posts: 662
Received 0 Likes
on
0 Posts
Car: 83 Z28
Engine: 406
Transmission: T56
Axle/Gears: 9" with 4.10s
Help me ID this Cam. Lazer?
I tried searching for lazer cam but I think that they are out of business.
Cam is a mechanical roller. Font has:
296A
305E
LC by the timing chain dowl and a 6 across from that.
I measured the base circle at .900 intake ~ 1.318 and exhaust ~ 1.275 so
.627/.562 with 1.5 rockers. I thought that it was hydraulic roller, but after researching the crower lifters I have with them I'm pretty sure it is mechanical. Since it mechanical I can slap it back together and degree the cam for more accurate specs, since hydraulics can't be dialed in w/o a solid lifter.
Cam is a mechanical roller. Font has:
296A
305E
LC by the timing chain dowl and a 6 across from that.
I measured the base circle at .900 intake ~ 1.318 and exhaust ~ 1.275 so
.627/.562 with 1.5 rockers. I thought that it was hydraulic roller, but after researching the crower lifters I have with them I'm pretty sure it is mechanical. Since it mechanical I can slap it back together and degree the cam for more accurate specs, since hydraulics can't be dialed in w/o a solid lifter.
09-05-2010, 01:55 AM
#2
Supreme Member
Re: Help me ID this Cam. Lazer?
296A 296 259 173 .429 .643
305E 305 269 179 .406 .609
.026-.026
305E 305 269 179 .406 .609
.026-.026
09-05-2010, 05:08 PM
#3
Senior Member
Thread Starter
iTrader: (5)
Join Date: Sep 1999
Location: Kansas City, MO
Posts: 662
Received 0 Likes
on
0 Posts
Car: 83 Z28
Engine: 406
Transmission: T56
Axle/Gears: 9" with 4.10s
Re: Help me ID this Cam. Lazer?
Thank you! Were did you get the info?
Last edited by graebz28; 09-05-2010 at 05:15 PM.
08-24-2015, 02:36 PM
#6
Member
iTrader: (43)
Join Date: Apr 2009
Location: Kansas City
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Car: LT4 C4, LT1 CE, 95' Dyno Air
Transmission: ZF S6-40, 4L60E, sprockets
Axle/Gears: 3.45, 3.07
Re: Help me ID this Cam. Lazer?
4800 stamped on the nose, 100C on the *** end.
http://web.archive.org/web/200504012...CamTables.html
http://web.archive.org/web/200504012...CamTables.html
Thread
Thread Starter
Forum
Replies
Last Post
86White_T/A305
Third Gen Association of Ontario
0
09-21-2015 05:28 PM
