Starter grinding?
Thread Starter
Member
iTrader: (3)
Joined: Aug 2006
Posts: 360
Likes: 0
From: Manitowoc, WI
Car: 90 Camaro
Engine: 350 tpi
Transmission: t56
Axle/Gears: 4.10
Starter grinding?
I'm not sure how to fix this.. Its a 1990 camaro 305, ram flywheel, jegs mini starter. I've got it shimmed so the starter sounds fine, but once every 4 or 5 starts the starter will grind. To me it looks like the starter is too far away from the flywheel, the starter gear is beginning to spin before the teeth on the starter are engaging the teeth on the flywheel. Is there any way to move the starter closer to the flywheel?
Last edited by G-reg; Sep 20, 2010 at 11:51 AM. Reason: missing some info
Supreme Member
iTrader: (8)
Joined: Jul 2001
Posts: 3,204
Likes: 7
From: New Boston, IL, USA
Car: '90 Formula 350
Engine: 383 SBC
Transmission: ProBuilt S/S 700-R4 & ACT 9" Stall
Axle/Gears: 10 bolt 3.23
Re: Starter grinding?
Depending on the mini-starter sometimes there are shims between the starter motor and the clockable plate. If you have the mini-starter that has the adjustable plate you can mark the mounting holes for the bolt(s) remove them, remove the plate, and look to see if there is a flat shim in it.
Thread
Thread Starter
Forum
Replies
Last Post
Gunner242
Electronics
7
Dec 25, 2015 04:49 PM
