Help with spark problem
Thread Starter
Joined: Nov 2009
Posts: 453
Likes: 0
From: Saint Louis, MO
Car: 86 Firebird LG4
Engine: 350
Transmission: 700r4
Axle/Gears: 3.23 limited slip
Help with spark problem
350 chevrolet computer controlled distributor
I don't think I'm getting any spark with it, I don't know for certain. I didn't feel anything holding one of the plug wires in my hand.
I switched distributors (with one that worked last time) and it's the same thing.
The engines out of the car. For the ignition wire I have one end clamped to the positive battery terminal and the other to the part labeled "BATT" on the distributor. the wire has 12 volts without crank and 10 volts cranking. I don't understand need help.
I don't think I'm getting any spark with it, I don't know for certain. I didn't feel anything holding one of the plug wires in my hand.
I switched distributors (with one that worked last time) and it's the same thing.
The engines out of the car. For the ignition wire I have one end clamped to the positive battery terminal and the other to the part labeled "BATT" on the distributor. the wire has 12 volts without crank and 10 volts cranking. I don't understand need help.
Thread
Thread Starter
Forum
Replies
Last Post