do I need a rebuild?
Thread Starter
Junior Member
Joined: Mar 2008
Posts: 72
Likes: 0
From: Clarksville, PA
Car: 1986 camaro iroc-z28
Engine: 305 TPI
Transmission: 700R4
do I need a rebuild?
I have a 1986 iroc-z28 with 51,000 original miles never seen snow or rain, sunshine only. took a ride about 5 miles round trip pulled in the driveway and the engine is knocking faster knock when i give is gas. so rebuild or maybe a cheaper fix. And befoer everyone tells me i know its a 305 TPI and why rebuild it right. ill tell you i have a aprassial letter done in april of 2008 for 11K for my car if I change the engine the value is lost. no more matching numbers. thanks everyone.
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: do I need a rebuild?
knocking or ticking? ticking is valves or exhaust leak, knocking is piston/rod issue.
Member
Joined: Apr 2008
Posts: 360
Likes: 0
From: Minnesnowta
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: do I need a rebuild?
11k huh? I'm pretty sure that's about what these cars retailed for in 1986. And that was with zero miles off the show floor. Not to mention that there has been a bazillion of them produced. Just sayin....
Mine had 63000 original miles on it and it was bluebooked for 2175.00
As far as the rebuild question: look farther into the noise before you condem your car to being torn apart by a tech (if your not rebuilding it yourself)
Mine had 63000 original miles on it and it was bluebooked for 2175.00
As far as the rebuild question: look farther into the noise before you condem your car to being torn apart by a tech (if your not rebuilding it yourself)
Thread Starter
Junior Member
Joined: Mar 2008
Posts: 72
Likes: 0
From: Clarksville, PA
Car: 1986 camaro iroc-z28
Engine: 305 TPI
Transmission: 700R4
Re: do I need a rebuild?
camaronewbie::: it is a knocking as far as i can tell.
TNT_Z28: well just sayin who gives a **** how much something cost when it was new! what about a chevelle 2,500 new just sayin. to be specific tnt_z28 october 2007 apprasial was done at 8,500 in april of 2008 11,250 and havent had it done since. And kelly blue book is nothing compared to an licensed appraiser. just sayin.
TNT_Z28: well just sayin who gives a **** how much something cost when it was new! what about a chevelle 2,500 new just sayin. to be specific tnt_z28 october 2007 apprasial was done at 8,500 in april of 2008 11,250 and havent had it done since. And kelly blue book is nothing compared to an licensed appraiser. just sayin.
Member
Joined: Apr 2008
Posts: 360
Likes: 0
From: Minnesnowta
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: do I need a rebuild?
just saying... no one will pay 11,000 for a car, when there is a boat load of them same thing for a quarter to a third of the price. is your car a unique VIN? what sets it apart? im honestly wondering im not trying to kick a hornet's nest
dont get so easily affended... you'll live longer
dont get so easily affended... you'll live longer
Supreme Member
iTrader: (2)
Joined: May 2009
Posts: 3,371
Likes: 2
From: Delaware
Car: 91' Firebird SOLD
Engine: 350 TPI +bolt-ons
Transmission: 700r4
Axle/Gears: 3:42
Re: do I need a rebuild?
pinging or knocking or ticking? Pinging is a sound like a tamborine (timing related). Ticking is more than likely valves and Knocking (sounds like a tapping with a hammer) is bearings.
Thread Starter
Junior Member
Joined: Mar 2008
Posts: 72
Likes: 0
From: Clarksville, PA
Car: 1986 camaro iroc-z28
Engine: 305 TPI
Transmission: 700R4
Re: do I need a rebuild?
well what sets it apart comes all the way down to the radio in it among other things but the radio was the kicker. what I was told makes mine 1 of 210 made i know there was like what 25,000 iroc-z28 made that year. its not the fact of getting offended so easliy its the fact when someone post something for HELP someone has got to get away from the point and cause posts that are not needed. thats all.
just saying... no one will pay 11,000 for a car, when there is a boat load of them same thing for a quarter to a third of the price. is your car a unique VIN? what sets it apart? im honestly wondering im not trying to kick a hornet's nest
dont get so easily affended... you'll live longer
dont get so easily affended... you'll live longer
Trending Topics
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: do I need a rebuild?
TNT_Z28 ... you need to take a look at this thread - many of us picked up high mileage 3rd gens for cheap (myself included), but many folks pay alot for pristine cars: https://www.thirdgen.org/forums/auto...-you-paid.html
And, even though I only paid $800 for mine, I now have well over $15k into it! To me, my car is priceless, and no appraisal would ever be enough.
If it's a 1 of 200 something car, I'd rebuild I guess.
And, even though I only paid $800 for mine, I now have well over $15k into it! To me, my car is priceless, and no appraisal would ever be enough.
If it's a 1 of 200 something car, I'd rebuild I guess.
Member
Joined: Apr 2008
Posts: 360
Likes: 0
From: Minnesnowta
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: do I need a rebuild?
TNT_Z28 ... you need to take a look at this thread - many of us picked up high mileage 3rd gens for cheap (myself included), but many folks pay alot for pristine cars: https://www.thirdgen.org/forums/auto-detailing-appearance/364984-how-much-you-paid.html
[quote=camaronewbie;4900412]
And, even though I only paid $800 for mine, I now have well over $15k into it! To me, my car is priceless, and no appraisal would ever be enough.
quote]
im in the same boat, i have no idea how much money ive dropped into my car. ive probably spent more money on gaskets than i origanally paid for the car. i wouldnt ever sell my car. the only way we're parting ways is if its totaled.
Member
Joined: Apr 2008
Posts: 360
Likes: 0
From: Minnesnowta
Car: 1987 Camaro Z28
Engine: 355ci, XE262 , 650dp
Transmission: T-5, RAM clutch
Axle/Gears: 3.23 limited slip
Re: do I need a rebuild?
well what sets it apart comes all the way down to the radio in it among other things but the radio was the kicker. what I was told makes mine 1 of 210 made i know there was like what 25,000 iroc-z28 made that year. its not the fact of getting offended so easliy its the fact when someone post something for HELP someone has got to get away from the point and cause posts that are not needed. thats all.
Thread
Thread Starter
Forum
Replies
Last Post
3.8TransAM
NW Indiana and South Chicago Suburb
1
Sep 27, 2015 08:37 PM





