will this cam ruin my heads?
#1
will this cam ruin my heads?
Hi all, i'm looking at getting the comp cam 08-501-8 cam with lift of .488/.495. I'm not sure what the stock heads of a L98 TPI will handle. I called comp cams and they suggested the 501 the first call and the second call the suggested a 500. Will the 501 be ok without having to machine my heads or put shims in there? Im getting new valve springs as well. I also do NOT want to need a tune.
#2
Supreme Member
![](https://www.thirdgen.org/forums/images/ranks/tgo10.gif)
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,748
Received 800 Likes
on
531 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: will this cam ruin my heads?
What year is your car?? Not need a tune? use a cam close to stock.
#3
Senior Member
iTrader: (3)
Join Date: Aug 2008
Location: Memphis, TN
Posts: 614
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 z28 Purple Haze
Engine: 5.7L Tuned Port Injection
Transmission: 700R4
Axle/Gears: 3.23 both spinning
Re: will this cam ruin my heads?
I have a Comp Cam with those same lift specs and I have stock heads. All I did was use the recommended springs, locks, and keepers and had a machine shop install them. No issues at all. With that cam, you will fare better with a tune. My cam number is 08-412-8. XR264HR
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM