need help with rear main seal cover bolts!
Thread Starter
Member
Joined: Jan 2012
Posts: 294
Likes: 0
From: Milwaukee
Car: 1984 Z28
Engine: Vortec 350, hotcam
Transmission: T56
Axle/Gears: 3.73
need help with rear main seal cover bolts!
I need help figuring out where the bolts go. I have the two small hex heads, a long bolt, spacer, stud and nut.
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: need help with rear main seal cover bolts!
Stock ;
looking from rear
the stud goes left side , long bolt goes right side and the two short ones go in between
looking from rear
the stud goes left side , long bolt goes right side and the two short ones go in between
Thread Starter
Member
Joined: Jan 2012
Posts: 294
Likes: 0
From: Milwaukee
Car: 1984 Z28
Engine: Vortec 350, hotcam
Transmission: T56
Axle/Gears: 3.73
Re: need help with rear main seal cover bolts!
Okay thanks. Does that spacer go with the stud then somehow? Also is there suppose to be two studs for the oil pan? Or do the oil pan bolts thread into the cover? I've never built a later model block so I'm not sure
Member
iTrader: (1)
Joined: Sep 2012
Posts: 164
Likes: 0
Car: 1989 IROC-Z28 Camaro
Engine: none
Transmission: T-56 W/ Spec 1 Clutch
Axle/Gears: 9 Bolt BW 3.27 Gears
Re: need help with rear main seal cover bolts!
thats odd...i didnt have a spacer on my rear main seal
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
I'llrocya
Interior Parts for Sale
3
Feb 2, 2016 11:43 PM
