I just bought a pair. Was curious on what people here thought about these heads. how much I might gain?

1.6 rockers going on as well
Crane Cam already in

 

This place sucks. Time and Time again the same results

 

Yeah, that's totally going to get you a positive response..

You asked a vague question when we literally know 0 about what you have. Explain to me how that warrants a good answer? The lack of responses indicates you asked a bad question that isn't worth responding to.

 

Gain over what heads? For all I know you have Victor Jr heads on there now.

 

Don't know much about the newer dart heads but I have a set of the older first design of iron eagles on a 355 that turns mid 12's.

 

Finally someone that gets "it"

thanks. So, I assume you like your heads? Ever dyno the car with those heads?

 

Attitude??. Here's your answer. There no one part that is going to make a difference on it's own.It is either a matched parts build or a jumbled parts turd.

Now if you want to learn something on here and open up to what you have,then more people then time you can spare will reply from qualified members.Other than that,the answers you get are no further ahead then when you asked the question.

Nuff said.

 

Don't get all pissy because you don't get it.

Dart makes 19 different SS head PNs that will work on a SBC so don't get all pissed off because you gave little to no information.

Also crane makes more than one cam so we might want to know that PN as well. It could be anything from mild to wild we don't know because YOU did not tell us.

We don't even know if they are going on a 305.

You want to know gains without giving information then I would guess somewhere between -150 to +150 hp



Jesus you ask questions like my wife.

Honey my cars making a noise

What does it sound like?

I don’t know

When does it happen?

I don’t know

Does it happen while breaking?

I don’t know

Is it a clunking sound?

I don’t know

Is it a whirling sound?

I don’t know

Does it happen only at high speeds?

I don’t know

Low speeds?

I don’t know



So when does it happen!?



NEVERMIND YOU DON'T KNOW WHATS WRONG JUST FORGET IT!!!!!!!!!!!!!!!

 

midas = butt hurt

zraffz= telepathetic brother from a different mother

I remind you of your wife? Tell her i said helllloooo

 

Not sure who midas is but he probably agrees you are to stupid to ask a question correctly. Stick to fart cannon civics they are more your speed.

 

heres a tip if youre interested in getting these, douchegloves

these heads are rebranded and sold as summit racing's house brand iron heads. they punch them out and put bigger valves in them.
still the same small 165cc runner flow about 10-15cfm less than vortecs on the intake
better chamber design vs oe heads, good dart casting quality
probably support 385hp MAX unported...

 

Heres pictures of all my tuner's with fart cans. They go ZOOOOMMMMbrrrrr

 

Douchegloves? Super good burn Brohiem

 

His information says 1984 5.0... why would he be looking into one of the cheaper sets of heads if he didn't have a relatively stock motor or at least stock heads on said motor?

And truthfully with just heads and no cam or rhyme or reason you WILL gain power with those heads over stockers. While the top of the motor is apart and since you have to adjust the valves anyway at that point, you might as well do a cam thats more appropriate for those heads too.

 

Thanks again for your input.

My iroc has a 5.7l. I've posted info all over this site about the car. It has what is believed a crane 2032 cam? Not even sure. The previous owner did the cam and had swirl port ti heads on it....yuck