Cam selection help
Thread Starter
Junior Member
Joined: May 2009
Posts: 48
Likes: 0
From: Richland WA
Car: 91 Z28 camaro
Engine: 305 TPI
Transmission: T 5
Axle/Gears: yukon duragrip 4.11
Cam selection help
I am a little confused on what cam to get, so I could us some advice.
The car is a 91 305 tpi 5 speed with headers and 3 inch exhaust with no cat. It is a weekend curser and I take it to the strip when I get the chance (about 4 to 5 times a year). I am going to be putting in comp 918 springs in rebuilt heads with full roller rockers and hardened pushrods. Comp recommended computer controlled 276HR-14(http://www.compcams.com/Company/CC/c...?csid=214&sb=2). It looks good in duration and lift but the lsa looks a bit wide. SO I was wondering if this would be a good cam for my car or will I be disappointed? Thanks for the help.
The car is a 91 305 tpi 5 speed with headers and 3 inch exhaust with no cat. It is a weekend curser and I take it to the strip when I get the chance (about 4 to 5 times a year). I am going to be putting in comp 918 springs in rebuilt heads with full roller rockers and hardened pushrods. Comp recommended computer controlled 276HR-14(http://www.compcams.com/Company/CC/c...?csid=214&sb=2). It looks good in duration and lift but the lsa looks a bit wide. SO I was wondering if this would be a good cam for my car or will I be disappointed? Thanks for the help.
Thread
Thread Starter
Forum
Replies
Last Post