I have a 1982 Camaro with 350 chevy engine. I have the Sanderson QP1200 headers with the LT1/LT4 Centerbolt Valve Covers with torx type head and washer P/N 12552321 & 12552322. I am looking for a spark plug wire loom set that will work to be able to route the wires away from heat. Since these valve covers were designed for the LT1/LT4 am I out of luck. The traditional centerbolt wire looms from made for u, r&m specialites, etc will not work. The bolt setups are different. Is there anyone that is using this setup. Any help would be greatly appreciated. Pics would help as well.