Timing for 350 hsr t5 88 gta
#1
Senior Member
Thread Starter
Join Date: May 2011
Location: New Bedford MA
Posts: 855
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Gta trans am project 1-1/2
Engine: 86 4 bolt main cammed sbc 355 hsr
Transmission: 89 wc bw t5
Axle/Gears: Bw 9 bolt (3.27) pbr 11in
Timing for 350 hsr t5 88 gta
Ok so im in the process of putting the distributor back in and im wondering about timing do i need to be right at 0 degrees or should i be 8 degrees btdc i know as long as u are in the 0-8 degree range the engine will fire up as long as the firing order is right am i correct or talking like i dont know what im talking about any help would be great
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,029
Received 1,663 Likes
on
1,261 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Timing for 350 hsr t5 88 gta
Will run at either. Prolly will run better at 8 BTDC.
#3
Senior Member
Thread Starter
Join Date: May 2011
Location: New Bedford MA
Posts: 855
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Gta trans am project 1-1/2
Engine: 86 4 bolt main cammed sbc 355 hsr
Transmission: 89 wc bw t5
Axle/Gears: Bw 9 bolt (3.27) pbr 11in
Re: Timing for 350 hsr t5 88 gta
Ok so i was correct looks like ill go at 8 degrees btdc now when i drop the dizzy down where ever the rotor is pointing that's where no.1 spark plug will be hooked up to
Thread
Thread Starter
Forum
Replies
Last Post