I'm converting to external coil no box, stock dizzy with msd modified hei dust cap and blaster ss coil, here's what I've done as per the instructions but it won't start I'm probably missing something obvious but I can't seem to figure it out...

Disconnect 3 pin and single pink pin harness from cap

Connect supplied pink "y" wire to pink in 3 pin harness and single pink pin, connect to positive on coil

Connect brown supplied wire to brown in 3 pin harness connect brown to negative on coil

Install msd modified dust cap and connect coil wire to dust cap.

Won't start?

Went back to the internal accel hei coil set up I had before no problems starting.