Vacuum port for vacuum advance

Subscribe
May 13, 2021 | 06:27 PM
  #1  
Is this a good spot, or should I have it lower ?
Reply 0
May 13, 2021 | 08:30 PM
  #2  
Re: Vacuum port for vacuum advance
Pretty sure that's the one Holley intended to be used for that purpose.

It's "ported" vacuum; there's no vacuum there until the throttle is somewhat open; not always "The Best" solution, but, a good starting point.

Try it and see what happens.

You like to live on the edge I see... rubber death-trap fuel lines. Not me.
Reply 1
May 14, 2021 | 03:36 AM
  #3  
Re: Vacuum port for vacuum advance
Quote: Pretty sure that's the one Holley intended to be used for that purpose.

It's "ported" vacuum; there's no vacuum there until the throttle is somewhat open; not always "The Best" solution, but, a good starting point.

Try it and see what happens.

You like to live on the edge I see... rubber death-trap fuel lines. Not me.
Thanks for the reply. Haha yeh the fuel lines were intended to be temporary. But that was months ago🙄 lol
Reply 0
Subscribe