Dyno shop compilation vid
#1
Dyno shop compilation vid
http://www.videocartel.com/videos/eppfinal.mpg
No racing content, but a worthwhile download. Blown Cobras, ProCharged LS1's, Lightnings, some old school muscle, misc other domestic muscle and one BADA$$ 3rd gen Camaro!
Huge file, 56K users stay far far away!
No racing content, but a worthwhile download. Blown Cobras, ProCharged LS1's, Lightnings, some old school muscle, misc other domestic muscle and one BADA$$ 3rd gen Camaro!
Huge file, 56K users stay far far away!
#7
Member
Join Date: Jun 2004
Location: Montgomery Alabama were not *******s
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 RS coupe
Engine: TBI 305.
Transmission: 700R4
Cool video man
Was it just me or did the guy in the white shirt only cover his ears on the 3rd gen camaro?
Was it just me or did the guy in the white shirt only cover his ears on the 3rd gen camaro?
Trending Topics
#9
Originally posted by 86'Bowtie
NICE, how long was that clip supposed too be? I only got a buck and a half downloaded. It cut off with the nova.
NICE, how long was that clip supposed too be? I only got a buck and a half downloaded. It cut off with the nova.
Only numbers I have are for the ATI ProCharged Hugger Orange Z28. He put down 544rwhp on that dyno run in the vid. Keep in mind that your looking at a Mustang dyno. DynoJet numbers (which are much more common) would show right around 600rwhp. Car has gone low low 11s in the 125 range, at Norwalk, bouncing off the rev limiter from the 1000' to the traps. Oh yeah, 100,000 mile stock bottom end!
BTW - That 3rd gen Camaro RS is a BBC car.
Last edited by Marc 85Z28; 12-24-2004 at 12:39 PM.
#11
Supreme Member
Join Date: May 2001
Location: Your neighbor's hood, MD
Posts: 2,228
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Originally posted by Aredross
Cool video man
Was it just me or did the guy in the white shirt only cover his ears on the 3rd gen camaro?
Cool video man
Was it just me or did the guy in the white shirt only cover his ears on the 3rd gen camaro?
Yeah, that happened with my car too at a local dyno day over the summer.
I only have slp headers with a borla setup, but it gets LOUD when you really lean on it!
I just put a borla kit on my ls1 car and it does not sound any where near as good.
Last edited by ES87iroc; 12-24-2004 at 01:09 PM.
#12
Supreme Member
Join Date: Apr 2003
Posts: 3,563
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 RS Camaro (Jet Black)
Engine: 95 383 CI (6.3) LT1
Transmission: 95 T-56
LS1 exhausts sound like crap IMO. Its not the same firing order. I love the way mustangs, SBC's and LT1's sound. All deep and throaty.
#13
Supreme Member
Join Date: May 2001
Location: Your neighbor's hood, MD
Posts: 2,228
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1987 Camaro Z28 IROC-Z
Engine: 5.7L TPI
Transmission: T5
Axle/Gears: 3.42:1
Originally posted by pasky
LS1 exhausts sound like crap IMO. Its not the same firing order. I love the way mustangs, SBC's and LT1's sound. All deep and throaty.
LS1 exhausts sound like crap IMO. Its not the same firing order. I love the way mustangs, SBC's and LT1's sound. All deep and throaty.
It does sound good when you hammer it, but the rest of the range is kinda ho-hum. Maybe when I put headers on it will sound better. I know my camaro did.
#14
Member
Join Date: Feb 2003
Location: Tampa Florida
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85 Berlinetta F41
Engine: 355
Transmission: TH700
Axle/Gears: 3.73 posi
I bet a nice cam would make your ls1 sound way better, I was riding with my buddy in his stage 2 srt-4 when he got WAXED by a 00 or so SS and I asked him at the next light what he had he said custom grind cam and by looking from behind the car there was dual pipes to mufflers with turndowns.. this thing was just a little loud for my taste but it sounded wicked...
Could someone fill me in on how dyno runs are performed?
I thought that you were supposed to take the reading at a 1:1 gear ratio.. like 3rd gear in most sticks right? Ive never seen anyone dropping the clutch on a dyno like that and powershifting? like i said fill me in I dont know but I just dont like the looks of that.. if it was my car anyway.. maybe they were just screwing around?
Could someone fill me in on how dyno runs are performed?
I thought that you were supposed to take the reading at a 1:1 gear ratio.. like 3rd gear in most sticks right? Ive never seen anyone dropping the clutch on a dyno like that and powershifting? like i said fill me in I dont know but I just dont like the looks of that.. if it was my car anyway.. maybe they were just screwing around?
Last edited by Chris5k; 12-26-2004 at 08:04 PM.
#15
Member
Join Date: Jan 2004
Location: florida
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 camaro
Engine: 572
Transmission: TH400
there is a dyno right buy my house. So i have seen a lot of cars dyno. I have never seen anyone just go threw the gears like that. Usually just get into third and hit it. Maybe they were just messing around. Good vid.
#16
Senior Member
Join Date: Apr 2003
Location: I said that when I was sober...ish
Posts: 737
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Mustang GT
Engine: hamsters
Transmission: a hamster wheel
That diesel with the duallys was waaaayyy cool. That video is pretty cool. I was wondering about the shifting also, Ive never seen that done. He was granny, not powershifting tho, power shifting sounds like rrrrrrrrRRRRRrrrrrrrRRRRRrrrrrr(gear-shift-gear-shift-gear )
#17
Senior Member
Join Date: Jul 1999
Location: College Park, MD
Posts: 701
Likes: 0
Received 0 Likes
on
0 Posts
Sweet video, though it would have been nice to see numbers with the pulls.
On the Mustang dyno I took my IROC to, they had an option to run through the simulated 1/4 mile. That's most likely what those guys were doing.
It's fairly accurate from what I've heard, as long as you enter the correct weight. My '89 ran a 14.3 @ 97 on that dyno, I let off for a second at the 2-3 shift because it didn't seem to want to shift.
When I ran it at the strip, I went 14.1 @ 97.8 with a clean WOT run. Both times I just let off the brake and stabbed the throttle to launch (Any stalling up caused massive wheelspin), the 60' at the strip was 1.99 (on cheapo 275/40/17 street tires).
On the Mustang dyno I took my IROC to, they had an option to run through the simulated 1/4 mile. That's most likely what those guys were doing.
It's fairly accurate from what I've heard, as long as you enter the correct weight. My '89 ran a 14.3 @ 97 on that dyno, I let off for a second at the 2-3 shift because it didn't seem to want to shift.
When I ran it at the strip, I went 14.1 @ 97.8 with a clean WOT run. Both times I just let off the brake and stabbed the throttle to launch (Any stalling up caused massive wheelspin), the 60' at the strip was 1.99 (on cheapo 275/40/17 street tires).
#19
Supreme Member
Join Date: Jul 2001
Location: Apex North Carolina
Posts: 1,007
Likes: 0
Received 0 Likes
on
0 Posts
i just seen this video it rocks. all good sounding cars. i agree the ls1 does sound weird. everyone ive heard doesnt sound like that. best cars i would say would be the silver transam and the orange mustang cobra. yea i know i said the cobra. that sounded was awsome. i love that whinny noise. what makes that mustang do that
#21
Originally posted by V6camaroman
i just seen this video it rocks. all good sounding cars. i agree the ls1 does sound weird. everyone ive heard doesnt sound like that. best cars i would say would be the silver transam and the orange mustang cobra. yea i know i said the cobra. that sounded was awsome. i love that whinny noise. what makes that mustang do that
i just seen this video it rocks. all good sounding cars. i agree the ls1 does sound weird. everyone ive heard doesnt sound like that. best cars i would say would be the silver transam and the orange mustang cobra. yea i know i said the cobra. that sounded was awsome. i love that whinny noise. what makes that mustang do that
#22
Originally posted by ES87iroc
Maybe when I put headers on it will sound better.
Maybe when I put headers on it will sound better.
#24
Kick *** video Marc. That red LS1 Z sound supercharged as well, that thing was a tire frying machine. I liked the thirdgen too though, it was putting a pretty good hurtin on that dyno. Awesome vid, good stuff.
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
9
10-19-2016 08:50 AM
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM