92 RS 305 vs 88 Mustang 5.0
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Michigan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS w/ heritage package
Engine: 305 v8 5.0 TBI
Transmission: 700r4
Axle/Gears: TrueTrac 3.23
92 RS 305 vs 88 Mustang 5.0
I have a 92 RS 305 5.0 TBI auto with a handfull of free mods and a few cheap ones. I get a call the other night from my friend saying their friend wants to race me in an 88 mustang 5.0. It's an auto and he said it had a 3.73 rear gear. I don't know a lot about 80's mustangs and haven't gotten a chance to race yet... How do you think I'd do?
Last edited by Steve 92 RS; 04-03-2009 at 07:20 AM.
#3
Member
Join Date: Aug 2001
Location: Massachusetts
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Car: '90 Mercury Grand Marquis GS
Engine: 5.0L Ford V8
Transmission: AOD
Axle/Gears: 8.8" Ford, 3.08:1
Hey Steve, welcome to thirdgen.org . What have you done to your car?
#4
Senior Member
Join Date: Sep 2004
Posts: 878
Likes: 0
Received 1 Like
on
1 Post
Car: 89' Iroc-Z G92
Engine: TPI 305 G92
Transmission: T-5
Axle/Gears: Limited 9 bolt, 3.45
TBI = dont bother trying, he has something like 60 solid horsepower more than you. If you were tpi manual you would have to drive perfect and he would have to screw up. Your car weighs about 300lbs. more.
#5
Supreme Member
Join Date: Aug 2001
Location: Western NY
Posts: 1,108
Likes: 0
Received 1 Like
on
1 Post
Car: 2007 Saturn Sky Redline
Engine: 2.0 turbo
Transmission: m5
Axle/Gears: 3.91 LSD
The tbi and the 305 are a horrible combination. TBI is an awesome induction system for a truck though. The Mustang is a few seconds faster than your car, you're not going to win this one. I wouldn't even waste gas trying.
#6
Supreme Member
Join Date: Aug 2004
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 5.7 350 TPI - SLP Runners, AFPR, MSD Goodies
Transmission: 700R4 - Shift Kit, Corvette Servo
Axle/Gears: BW 9 bolt, 3.27s
.
If you race that Mustang, your going to get killed
#7
Junior Member
Thread Starter
Join Date: May 2004
Location: Michigan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS w/ heritage package
Engine: 305 v8 5.0 TBI
Transmission: 700r4
Axle/Gears: TrueTrac 3.23
I have some airfilter work done, I expanded the element housing, put a bigger filet in, removed some tac welding blocking intake. I have an Edlebrock exhaust system. I'm getting a Hypertech chip soon and an Edlebrock performer air gap intake. I have a couple of other small things too. I removed the restricter plate on my cam, it was a roller rocker so I gained about 30 hp easy mod. I'm probably running at around 220 instead of 180 right now. I will probably still race the guy to see how I do though.
And you're right about the TBI for the 305. I'm probably going to convert it into a TPI or sequential fire when I get the time.
And you're right about the TBI for the 305. I'm probably going to convert it into a TPI or sequential fire when I get the time.
Last edited by Steve 92 RS; 08-07-2005 at 01:00 PM.
Trending Topics
#8
Supreme Member
Join Date: Dec 2001
Location: Newark, DE
Posts: 1,960
Likes: 0
Received 1 Like
on
1 Post
Car: 2006 Corvette
Engine: LS2
Transmission: T56
Axle/Gears: 3.42s
maybe everyone else missed that the Stang was an auto? hell still get beat, but not as badly as everyone says. an auto Stang with only 3.73 gears with an average driver should be a high 14 sec car. the autos really slow those 5.0s down
if it was a stick, hed be in the low 14s
if it was a stick, hed be in the low 14s
#10
Supreme Member
Join Date: Aug 2004
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 5.7 350 TPI - SLP Runners, AFPR, MSD Goodies
Transmission: 700R4 - Shift Kit, Corvette Servo
Axle/Gears: BW 9 bolt, 3.27s
Originally posted by DevilsAddvocate
am i the only one that read he took the restrictor plate off the cam
am i the only one that read he took the restrictor plate off the cam
You can't really gain much power by 'fiddling with the air cleaners' yes it helps but it doesnt win races. There isn't anyway you putting out 220 hp. prob around 160 at the wheels.
#11
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
Actually, you're probably making about 180 at the crank, up from 170 stock. That is assuming your car made 170 when you got it, and hadn't decreased it's power output due to poor maintenance and normal wear, which it most likely did.
But in any event, he'll probably run a high 14, low 15, being an auto (fox body autos sucked, nothing like our autos) and probably being thrashed on. Still faster than you. Don't bother trying.
But in any event, he'll probably run a high 14, low 15, being an auto (fox body autos sucked, nothing like our autos) and probably being thrashed on. Still faster than you. Don't bother trying.
#12
Junior Member
Thread Starter
Join Date: May 2004
Location: Michigan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS w/ heritage package
Engine: 305 v8 5.0 TBI
Transmission: 700r4
Axle/Gears: TrueTrac 3.23
I also have the Edlebrock exhaust system on it. I have beaten the 05 v6 Mustang. At around 80 i had 4 cars on him. My intake mod added at least 10 hp and I'm pretty sure I have 180 stock.
#13
Supreme Member
Join Date: Jan 2005
Location: Colorado
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Steve 92 RS
. My intake mod added at least 10 hp
. My intake mod added at least 10 hp
#14
Supreme Member
Join Date: Aug 2004
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 5.7 350 TPI - SLP Runners, AFPR, MSD Goodies
Transmission: 700R4 - Shift Kit, Corvette Servo
Axle/Gears: BW 9 bolt, 3.27s
Originally posted by stu
Is this even close to true? I know that Camaros are different than what I'm used to, so I'm not sure whether to believe this or not. I know on any of the cars I've ever owned, you'd need, an intake, a header, a high flow cat, and a full exhaust, to get anywhere near a 10 whp gain.
Is this even close to true? I know that Camaros are different than what I'm used to, so I'm not sure whether to believe this or not. I know on any of the cars I've ever owned, you'd need, an intake, a header, a high flow cat, and a full exhaust, to get anywhere near a 10 whp gain.
I doubt the trick intake setup would be worth more than 5 at the most..
#15
Supreme Member
Join Date: Jan 2005
Location: Colorado
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Nope, not at all. I've seen dyno's of cars with an intake and a full exhaust making an extra 3 whp. Yep 3 horse power at the wheels.
That's why I'm always saying what a waste of time and money it is to go N/A with imports. For the cost it'd cost someone with the same car as me to swap a VTEC motor into the car, I about trippled my wheel horsepower.
That's why I'm always saying what a waste of time and money it is to go N/A with imports. For the cost it'd cost someone with the same car as me to swap a VTEC motor into the car, I about trippled my wheel horsepower.
#16
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,207
Likes: 0
Received 375 Likes
on
288 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Originally posted by stu
Is this even close to true? I know that Camaros are different than what I'm used to, so I'm not sure whether to believe this or not.
Is this even close to true? I know that Camaros are different than what I'm used to, so I'm not sure whether to believe this or not.
The reason why you don't see gains like that on most N/A 4 cylinder cars is because they have pretty good intakes/exhaust right from the factory. The manufactuer doesn't have to restrict the intake/exhuast to keep the power numers at a pre-determind set value. Companys that use the same engine for for than one platform also have to do this to preserve their power rating for their bread and butter car. If the vette didn't exist the F-body would have not been so underrated/restricted. A stock M6 LS1 f-body will put more power to the wheels than a vette with the same engine. On paper GM disguises that with their advertised power ratings. So they choke the motor down a bit so that it makes less power. GM only really did this in the last 20 years with the F-body and vette. For the most part its 4 and 6 cylinder cars have numbers close to their ratings with properly sized intakes and exhausts. They will do anything to protect the image of the vette.
#20
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,207
Likes: 0
Received 375 Likes
on
288 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Originally posted by DevilsAddvocate
stu
stu
#23
Senior Member
Join Date: Sep 2004
Posts: 878
Likes: 0
Received 1 Like
on
1 Post
Car: 89' Iroc-Z G92
Engine: TPI 305 G92
Transmission: T-5
Axle/Gears: Limited 9 bolt, 3.45
Stu, GM restricted as stated all f-body engines that were the same as the Corvettes engine. Notice how on the intake the maf doesn't flow all to well the intake itself is rather small, and I believe that the Corvette and the f-body got different plenums.(Don't know how true that is.) But the throttlebody flows 650cfm. Get the hint. Here is a stock setup 305 G92... Makes about 230hp maybe a little more(240hp max) my exhaust got blown out.
Yeah I know I have posted this pic a few times but it shows the engine nicely.
Yeah I know I have posted this pic a few times but it shows the engine nicely.
Last edited by Mcdamit; 08-07-2005 at 11:10 PM.
#24
Supreme Member
Join Date: Jan 2005
Location: Colorado
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by DevilsAddvocate
decently fast...for a honda anyway
decently fast...for a honda anyway
http://www.cheesefrog.com/frog/tehbeast.wmv
#25
Senior Member
Join Date: May 2004
Location: Louisville, KY
Posts: 657
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Mustang Coupe/89 Camaro RS
Engine: 5.0 carb'd/305
Transmission: T5/T5
Axle/Gears: 3.73 and stock TrakLok/stock GM
That guy has a nice setup, how much money did he spend, any idea? That turbo was pretty loud and it osunded pretty mean.....It woulda been better if it was a 1G DSM though
In any case, Stu's car was damn quick for what it was...a cheap, mild turbo build up. He didnt go all out, cause if he did, it still be running
As for mileage, I chuckle about this all the time. My Mustang has 228k on the stock shortblock...mind you its from the factory forged but it still knocked down 9.3's in the 1/8th (mid 14's) through a straw ghetto'd up exhaust, blown rear shocks, bald street tires, stock poo clutch and full street trim only thing done was Hurst shifter and fiberglass hood....even has the spare. Im looking for 8.8's with 3.73's, DR's, DF Clutch, Bassani X-pipe into FlowMaster 2 chambers, smog delete, new shocks...if it doesnt hit it, it is for sale immediately, grrrrrr.
In any case, Stu's car was damn quick for what it was...a cheap, mild turbo build up. He didnt go all out, cause if he did, it still be running
As for mileage, I chuckle about this all the time. My Mustang has 228k on the stock shortblock...mind you its from the factory forged but it still knocked down 9.3's in the 1/8th (mid 14's) through a straw ghetto'd up exhaust, blown rear shocks, bald street tires, stock poo clutch and full street trim only thing done was Hurst shifter and fiberglass hood....even has the spare. Im looking for 8.8's with 3.73's, DR's, DF Clutch, Bassani X-pipe into FlowMaster 2 chambers, smog delete, new shocks...if it doesnt hit it, it is for sale immediately, grrrrrr.
#26
Supreme Member
Join Date: May 2003
Location: CT
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
Car: Mustang
Engine: Bolt Ons
Transmission: Stock
Axle/Gears: 3.73
I have a hard time believeing the originally poster. Maybe its some of the rediculous claims he is spitting out, like restrictor plates, 10 rwhp gains, 30 rwhp gains, yet has NO track times or dyno numbers to prove anything! I had a stock auto with 3.73s and the car ran high 14s at a crappy track. Probably had a mid 14 in it at a good track. Never assume the other guys car will run the slowest number possible, always assume him to be the fastest possible, then hope it doesnt!
Stus car wasnt just decent it was very fast. It would have walked most of the thirdgens on this site. It probably had less money into it, and got better gas mileage too...
In the end the original poster sounds like hes spewing a lot of fictional blown up numbers to make us say he will win the race. If thats all he wants, then sure you will win. Now that your happy, someone thinks your going to win, the race will most likely never happen like all the rest and we wont have to worry about it anymore!
Stus car wasnt just decent it was very fast. It would have walked most of the thirdgens on this site. It probably had less money into it, and got better gas mileage too...
In the end the original poster sounds like hes spewing a lot of fictional blown up numbers to make us say he will win the race. If thats all he wants, then sure you will win. Now that your happy, someone thinks your going to win, the race will most likely never happen like all the rest and we wont have to worry about it anymore!
#27
Supreme Member
Join Date: Aug 2004
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 5.7 350 TPI - SLP Runners, AFPR, MSD Goodies
Transmission: 700R4 - Shift Kit, Corvette Servo
Axle/Gears: BW 9 bolt, 3.27s
Originally posted by stu
Nope, not at all. I've seen dyno's of cars with an intake and a full exhaust making an extra 3 whp. Yep 3 horse power at the wheels.
That's why I'm always saying what a waste of time and money it is to go N/A with imports. For the cost it'd cost someone with the same car as me to swap a VTEC motor into the car, I about trippled my wheel horsepower.
Nope, not at all. I've seen dyno's of cars with an intake and a full exhaust making an extra 3 whp. Yep 3 horse power at the wheels.
That's why I'm always saying what a waste of time and money it is to go N/A with imports. For the cost it'd cost someone with the same car as me to swap a VTEC motor into the car, I about trippled my wheel horsepower.
#28
Junior Member
Thread Starter
Join Date: May 2004
Location: Michigan
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS w/ heritage package
Engine: 305 v8 5.0 TBI
Transmission: 700r4
Axle/Gears: TrueTrac 3.23
So last night I call my friend to see if her friend can come meet me somewhere to race. We meet up in a parking lot and head to a nice 2 lane road. We get to a light and I still don't know what to think beacuse of all the mixed feedback. His car doesn't sound as nice as mine but it's better than most mustangs. It goes green and we hit it. It was pretty even untill about 30 then he pulled away from me about 2 car lenghts untill 60. He stopped pulling away and I caught up to him at 80! I had a car lenght on him at 95 and we ended it at 100.
#30
Supreme Member
Join Date: Jan 2005
Location: Colorado
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 87TPI350KID
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
Anyway, that's why I was asking if what this guy was saying was anywhere near correct you super genius! I know the unbelievable gains that are possible on 'our v8s' due to the unbelievably unfinished engineering.
#33
Supreme Member
Join Date: May 2003
Location: CT
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
Car: Mustang
Engine: Bolt Ons
Transmission: Stock
Axle/Gears: 3.73
Originally posted by 87TPI350KID
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
#35
Junior Member
Join Date: Oct 2003
Location: Stafford, virginia
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1994 25th Anniversary Trans Am
Engine: Lt1
Transmission: A4
Originally posted by Steve 92 RS
I have some airfilter work done, I expanded the element housing, put a bigger filet in, removed some tac welding blocking intake. I have an Edlebrock exhaust system. I'm getting a Hypertech chip soon and an Edlebrock performer air gap intake. I have a couple of other small things too. I removed the restricter plate on my cam, it was a roller rocker so I gained about 30 hp easy mod. I'm probably running at around 220 instead of 180 right now. I will probably still race the guy to see how I do though.
And you're right about the TBI for the 305. I'm probably going to convert it into a TPI or sequential fire when I get the time.
I have some airfilter work done, I expanded the element housing, put a bigger filet in, removed some tac welding blocking intake. I have an Edlebrock exhaust system. I'm getting a Hypertech chip soon and an Edlebrock performer air gap intake. I have a couple of other small things too. I removed the restricter plate on my cam, it was a roller rocker so I gained about 30 hp easy mod. I'm probably running at around 220 instead of 180 right now. I will probably still race the guy to see how I do though.
And you're right about the TBI for the 305. I'm probably going to convert it into a TPI or sequential fire when I get the time.
Is anyone else as confused as me? This kid has no idea what he's saying. Expanded element housing? Restrictor plate on the cam? Roller Rocker Cam? Dude, first things first is you gotta crawl before you can walk. Which means studying up about you car a little, seeing what it is and isn't capable of doing. And in this case, you will not win, and if you said you pulled 2 cars from 60-80 with a pretty much stock Lo3 you must have been dreaming. Also, take the time to read up on the boards and do things right...learn!!! Saying crap like expanding your element housing and removing your cam restrictor plate makes you look pretty stupid and adds to the already tainted stereotype that thirdgen owners have. Do yourself a favor and search for "Open Element" and "Hypertech" and see which mod is actually worth while. Also, above all, realize what you got and work up from there, and what you have right now is a combination of the most restrictive parts GM has ever placed on a small back v8 that will have trouble running with a newer Civic Si.
#36
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
this thread is useless and gay'd now lol.
this kid obviously is just douching with us so because he thought he might have something to show to his girlfriend..?
lock lock!
this kid obviously is just douching with us so because he thought he might have something to show to his girlfriend..?
lock lock!
#37
Supreme Member
Join Date: Jan 2005
Location: Colorado
Posts: 1,793
Likes: 0
Received 0 Likes
on
0 Posts
I think it's run its course. But on a side note, I think I might try to put my car on the road again eventually. I wanted something else, but I've already got a perfectly good shell to work with that's already paid off. This thread just made me miss my car.
#38
Supreme Member
iTrader: (1)
Join Date: Dec 1999
Location: Mays Landing NJ
Posts: 4,335
Likes: 0
Received 4 Likes
on
4 Posts
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by Steve 92 RS
So last night I call my friend to see if her friend can come meet me somewhere to race. We meet up in a parking lot and head to a nice 2 lane road. We get to a light and I still don't know what to think beacuse of all the mixed feedback. His car doesn't sound as nice as mine but it's better than most mustangs. It goes green and we hit it. It was pretty even untill about 30 then he pulled away from me about 2 car lenghts untill 60. He stopped pulling away and I caught up to him at 80! I had a car lenght on him at 95 and we ended it at 100.
So last night I call my friend to see if her friend can come meet me somewhere to race. We meet up in a parking lot and head to a nice 2 lane road. We get to a light and I still don't know what to think beacuse of all the mixed feedback. His car doesn't sound as nice as mine but it's better than most mustangs. It goes green and we hit it. It was pretty even untill about 30 then he pulled away from me about 2 car lenghts untill 60. He stopped pulling away and I caught up to him at 80! I had a car lenght on him at 95 and we ended it at 100.
Right dude. So in the length(feet wise) it took you to go 30-40mph you ended up traveling 3 car lengths faster than him?(2 back, then one in front).
I'm not one to normally throw the flag up around here but I find this VERY hard to believe.
Good kill I guess....if it's true.
EDIT: **** didn't see cas0484's response. I read the race results and immediate had to respond
#39
Supreme Member
iTrader: (1)
Join Date: Dec 1999
Location: Mays Landing NJ
Posts: 4,335
Likes: 0
Received 4 Likes
on
4 Posts
Car: 2018 Camaro SS
Engine: LT1 w/Paxton 1500SL
Originally posted by 87TPI350KID
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
Your retarded, we aint talking about a sh!tty vtec.. our v8s will do alot more good with headers
#42
Supreme Member
Join Date: May 2003
Location: CT
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
Car: Mustang
Engine: Bolt Ons
Transmission: Stock
Axle/Gears: 3.73
I agree the story is BS, the poster is just BSing everyone...
Nice try, but it sucks when on a thirdgen board the support goes to the Mustang. Makes you feel unloved huh? LOL!
Nice try, but it sucks when on a thirdgen board the support goes to the Mustang. Makes you feel unloved huh? LOL!
#43
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
that's because most of the people on this board realize that an LO3 is only competition for an early 90's honda, not a 5.0 Mustang GT.
Some kids think that because it's "V8 American Muscle," although I'd hardly call a stock - stockish 305 'Muscle,' it's infallible. The real truth is that most of today's family cars made by Honda would stomp the crap out of an LO3 by probably a good second in the quarter.
Some kids think that because it's "V8 American Muscle," although I'd hardly call a stock - stockish 305 'Muscle,' it's infallible. The real truth is that most of today's family cars made by Honda would stomp the crap out of an LO3 by probably a good second in the quarter.
#44
Junior Member
Join Date: Oct 2003
Location: Stafford, virginia
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1994 25th Anniversary Trans Am
Engine: Lt1
Transmission: A4
Off topic, but since this thread is stupid anyways...Urbanhunter I noticed you also have a 25th Bird. Just wonderin if you have a website on it with mods/pics. I love finding other 25th owners and seeing how their cars are coming along. Also, have been able to find a company that does replacement leather seat covers that are as close to OEM as possible?
#45
Supreme Member
Join Date: Aug 2004
Posts: 1,327
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z Camaro
Engine: 5.7 350 TPI - SLP Runners, AFPR, MSD Goodies
Transmission: 700R4 - Shift Kit, Corvette Servo
Axle/Gears: BW 9 bolt, 3.27s
Originally posted by 25thmustang
Umm Id see maybe 2-4 rwhp with headers over my stockers. Dont group ALL V8s together!
Umm Id see maybe 2-4 rwhp with headers over my stockers. Dont group ALL V8s together!
#46
Supreme Member
Join Date: May 2003
Location: CT
Posts: 2,839
Likes: 0
Received 0 Likes
on
0 Posts
Car: Mustang
Engine: Bolt Ons
Transmission: Stock
Axle/Gears: 3.73
our v8s will do alot more good with headers
And full exhaust and intake is a lot more than just saying we do better with headers. I really only have exhaust and intake bolt ons, coupled with a set of valves in the heads, and it runs alright, so I know a bit about what they "can" do!
#47
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
Originally posted by cas0484
Off topic, but since this thread is stupid anyways...Urbanhunter I noticed you also have a 25th Bird. Just wonderin if you have a website on it with mods/pics. I love finding other 25th owners and seeing how their cars are coming along. Also, have been able to find a company that does replacement leather seat covers that are as close to OEM as possible?
Off topic, but since this thread is stupid anyways...Urbanhunter I noticed you also have a 25th Bird. Just wonderin if you have a website on it with mods/pics. I love finding other 25th owners and seeing how their cars are coming along. Also, have been able to find a company that does replacement leather seat covers that are as close to OEM as possible?
I don't have a site yet, but I can send you all the pics you want haha.
It's just a cat delete, 3" bullet muffler exhaust, airfoil ($5 why not) free mods and some weight reduction right now. I'm also working on the suspension too. Just put in new KYB GR-2s. I've done the optispark, plugs, wires, water pump, fuel filter, tranny filter, front windshield, lights and bulbs, side pillar birds, rear PONTIAC stickers, new Nitto tires, new head unit, 4 new infiniti speakers, two new Pyle of **** subs, a new amp, installation and amp kit, custom plate - SLOW TA, heater hoses, belts, had an exhaust leak fixed, numerous squeaks and rattles, $500 worth of car cleaning products and counting.. blah blah.. so I havn't had much time/money to mod her.
Have you found a way to get these wheels clean??? OMFG. Mag cleaner from eagle one works okay but omg they're dirty and stained still. And do you know where to get new center caps?
Hit me up on AIM at pirateDR6
Last edited by urbanhunter44; 08-10-2005 at 08:34 PM.
#48
TGO Supporter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
nice 4th gen you got there Seats look mint to me! To bad its not a 6 speed Still one fine ride you got there
#49
Supreme Member
iTrader: (3)
Join Date: May 2004
Location: Brighton, CO
Posts: 4,345
Likes: 0
Received 1 Like
on
1 Post
Car: '72 Chevy Nova
Engine: Solid roller 355
Transmission: TH350
Axle/Gears: 8.5" 10-bolt 3.73 Posi
Thanks! I specifically looked for an auto because it's a daily driver (when it's not broken) and I drag race it. The driver's seat has a cancer tear in it from people getting in and out.
#50
TGO Supporter
Join Date: Apr 2004
Location: Massachusetts
Posts: 4,224
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28 & 21 Hellcat Challenger
Engine: L98, Hemi 6.2
Originally posted by urbanhunter44
Thanks! I specifically looked for an auto because it's a daily driver (when it's not broken) and I drag race it. The driver's seat has a cancer tear in it from people getting in and out.
Thanks! I specifically looked for an auto because it's a daily driver (when it's not broken) and I drag race it. The driver's seat has a cancer tear in it from people getting in and out.
they only made like 700 of those! That thing would be sitting in my garage with my low mileage Z28! LOL keep her clean man, i love that interior! How many miles?