Third Gen Association of Ontario Regional message board for everyone in Southern Ontario and nearby regions.

Rpo Codes

Old Mar 20, 2002 | 11:18 PM
  #1  
86IROKZ's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2002
Posts: 98
Likes: 0
From: Kitchener
Rpo Codes

Can anyone help me out here. I was running my RPO codes, an came across 5 that the decoder cannot locate.
They are as follows:
1- A4L
2- E7Z
3- GC5
4- GC6
5- Z31

I thought maybe i copied them wrong, but rechecked, and they are correct.
Any help would be greatly appreciated
Reply
Old Mar 21, 2002 | 07:06 AM
  #2  
IROCKER's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 2,173
Likes: 0
From: Ontario, Canada
Try out the Tech section on my site, they may be there...I'm in a bit of a rush or I would look for ya.
Reply
Old Mar 21, 2002 | 08:55 AM
  #3  
86IROKZ's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2002
Posts: 98
Likes: 0
From: Kitchener
Nice site you have IROCKER. Very well done. I looked for those codes, an came up with nothing. Maybe ill just call a dealer, an have them check it out for me. Thanks for your help.
Attached Thumbnails Rpo Codes-86irokz-2.jpg  
Reply
Old Mar 21, 2002 | 09:55 AM
  #4  
86IROKZ's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2002
Posts: 98
Likes: 0
From: Kitchener
Ok, so i called a Chev dealership. They dont know what these codes are either, they find this very odd. For the 3rd time, i have checked the numbers to be sure i correctly wrote them down. Dunno what to do now.
Another question----- Is a Dealer Ordered Car, a special order by a customer, or just the dealer askin to have one on their lot??
This is buggin the SH%t outta me, wonderin if theres something different than normal about the car.
Reply
Old Mar 21, 2002 | 10:00 AM
  #5  
nblanchard's Avatar
Banned
 
Joined: Jul 2001
Posts: 2,067
Likes: 0
From: Welland, ON, Canada
That is very strange... maybe you should put a post up in one of the main boards
Reply
Old Mar 21, 2002 | 10:03 AM
  #6  
skidoo68's Avatar
Member
 
Joined: Oct 2001
Posts: 146
Likes: 1
From: Waterloo,Ontario
I also had around 5-6 codes that were non exsistant for my 85 Iroc.
Reply
Old Mar 21, 2002 | 10:08 AM
  #7  
skidoo68's Avatar
Member
 
Joined: Oct 2001
Posts: 146
Likes: 1
From: Waterloo,Ontario
Actually just found my RPO codes that i wrote down and have the same ones as yours except for the first one A4L.
Reply
Old Mar 21, 2002 | 10:12 AM
  #8  
nblanchard's Avatar
Banned
 
Joined: Jul 2001
Posts: 2,067
Likes: 0
From: Welland, ON, Canada
I had a few that I couldn't get on my car as well... oh well... I don't know what to say.. if the dealer can't even find them, then who else could know?
Reply
Old Mar 21, 2002 | 11:36 AM
  #9  
Kevs87TA's Avatar
Senior Member
 
Joined: Feb 2002
Posts: 956
Likes: 0
From: Cambridge, Ontario, Canada
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
When i had my rpo's decoded by the dealer, there was about 10 codes that came up as "no description available" I ran them on other websites decoders and there was no listins of them.
I also have the RPO #z31. I was looking at your codes and the only thing that came close was AL4-SEAT, R.R.BKT
E7Z-Key, SPEEDOMETER (delete)
Don't ask me what they mean, I haven't a clue.
Reply
Old Mar 21, 2002 | 05:30 PM
  #10  
len's Avatar
len
Junior Member
 
Joined: Jan 2002
Posts: 34
Likes: 0
From: ontario
my car too has the same unknown codes plus a few extras. gc5, gc6 are some kind of paint codes if i remember correctly, it was in the history board a while back.
Reply
Old Mar 21, 2002 | 05:38 PM
  #11  
IROCKER's Avatar
Supreme Member
 
Joined: Mar 2001
Posts: 2,173
Likes: 0
From: Ontario, Canada
Thanks for the comps on the site. There is so much work I have to do now to update it and there is soooo much technical stuff I want to add. Just need to find the time.

Well, I check the Camaro White Book as well and no luck. I wouldn't worry about it too much. I know there was some on RPO build sticker that I could decode either.
Reply
Old Mar 21, 2002 | 10:16 PM
  #12  
86IROKZ's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2002
Posts: 98
Likes: 0
From: Kitchener
Thanks to all who tried to help me out, much appreciated
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89-IROCZ-5.0TPI
TPI
10
Feb 22, 2022 09:26 PM
Falcon50
DFI and ECM
81
Aug 22, 2020 03:26 PM
racereese
Tech / General Engine
14
Oct 3, 2015 03:46 PM
Luigytico09
TPI
0
Oct 1, 2015 08:46 AM
dusterbd
TPI
0
Sep 29, 2015 08:40 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:08 PM.