TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

HELP-Need MAF module

Thread Tools
 
Search this Thread
 
Old Aug 6, 2002 | 10:53 PM
  #1  
cfar's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 5
Likes: 0
HELP-Need MAF module

I need a MAF burn off module for my 85 Z / 305 TPI.
This is the silver box mounted to the ECM with a six wire plug.
Accept new or used or info where to locate one.
Thanks for the good forums and any help provided.
Frank
Apopka, FL
Reply
Old Aug 7, 2002 | 12:29 AM
  #2  
Guest
Guest
 
Posts: n/a
I know this isnt what you want to hear, but now is the time to ditch that setup. Either lose it for the later MAF system with relays that cost $10 a piece (rather than an $800 module) or since you are replacing things go to a SD setup.

85 MAF systems really belong in a grave when they die, unfortunately.
Reply
Old Aug 7, 2002 | 10:51 AM
  #3  
tpi_roc's Avatar
Supreme Member
 
Joined: Aug 2001
Posts: 2,747
Likes: 0
From: Orygun
I have an extra 85 maf burn off module
Reply
Old Aug 7, 2002 | 07:40 PM
  #4  
cfar's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 5
Likes: 0
Founf One

Thanks for the help.
For the future shopper- Borg Warner has them for 300.00 party # CBE1000 .
GM was 800.00.
Reply
Old Aug 7, 2002 | 08:57 PM
  #5  
tpi_roc's Avatar
Supreme Member
 
Joined: Aug 2001
Posts: 2,747
Likes: 0
From: Orygun
I woulda sold it for $3.99

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
InfernalVortex
Electronics
10
Apr 20, 2021 11:31 AM
racereese
Tech / General Engine
14
Oct 3, 2015 03:46 PM
dusterbd
TPI
0
Sep 29, 2015 08:40 AM
tattmann
Electronics
1
Sep 27, 2015 05:20 PM




All times are GMT -5. The time now is 02:25 AM.