Ok I did a search and got some useful info. Has anyone used a Ram-jet intake with something like a Hot Cam and a speed density setup with good result??? this is what I want to do.

 

So nobody has a RamJet ? And you never go to the track?
I guess we will just keep talking about converted LT1 intakes for thd next two years.

 

check about half way down this post for some times.
https://www.thirdgen.org/techbb2/sho...&highlight=HSR
And here's a HSR setup puting down 380 rwhp!!!
https://www.thirdgen.org/techbb2/sho...ealth+Ram+Dyno
theres not alot of real world info out on this intake yet as it is so new, give it some time.

 

He's asking about the RamJet, not the StealthRam...

 

Sheet I'm sorry, I don't know why I thought you were talking bout the HSR.

Only times I've seen of the Ram Jet was in a magazine a while back. It was a GM project Camaro, a yellow RS.
Had the crate ramjet 350 with 350 hp. They had it in front of a 6 speed I believe with 3.42 gears.
They had a time of 13.0 @ 105 if I remember correctly.

 

And that was with a itty-bitty cam

Can't wait to throw mine together.

 

Did it fit under the stock hood?

 

They had the stock hood on the car, it was a reg. RS hood. I don't know if they did any clearancing but it didn't look like it.
I remember it was a HotRod issue.

 

A friend of mine did a Ramjet install in a customers IROC. Only clearance issue was the TB hit the hood brace, so a little "persuasion" with a cut off wheel solved the problem.