TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

correct me if i am wrong

Thread Tools
 
Search this Thread
 
Old Nov 11, 2002 | 05:57 PM
  #1  
c4boom's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: May 2002
Posts: 569
Likes: 0
From: concord New Hampshire
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
correct me if i am wrong

ok if the temp and knock sensor where un pluged i should get a ses light. the two sensors on the pass side of my motor are unpluged one in the head the other in the block. the car is a 87 with a l98 in it. am i right thinking the one in the head is the temp and the one in the block is the knock. i would plug them back in but the goober that had the car befor me broke the clips where can i get new fittings
Reply
Old Nov 11, 2002 | 07:45 PM
  #2  
89BlueTA's Avatar
Member
 
Joined: Nov 2000
Posts: 474
Likes: 0
From: Tecumseh,Mi,USA
You would not get an SES light for having the knock sensor unplugged on an 87, I am not sure about the temp sensor.

nick
Reply
Old Nov 11, 2002 | 07:50 PM
  #3  
Bort62's Avatar
Supreme Member
 
Joined: Oct 2000
Posts: 2,264
Likes: 0
would plug them back in but the goober that had the car befor me broke the clips where can i get new fittings

Junkyard.
Reply
Old Nov 11, 2002 | 09:35 PM
  #4  
c4boom's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: May 2002
Posts: 569
Likes: 0
From: concord New Hampshire
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
bummer no f bodys in yards around hear what other cars use the the same clips
Reply
Old Nov 11, 2002 | 10:11 PM
  #5  
MdFormula350's Avatar
TGO Supporter
 
Joined: Nov 2001
Posts: 11,634
Likes: 3
From: Maryland; USA
the fan switch is the one way up further back on the engine and higher up and has the one wire going to it..

the knock sensor is the closest one and lower in the block..
Reply
Old Nov 11, 2002 | 10:14 PM
  #6  
deadbird's Avatar
TGO Supporter
 
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Don't quote me but, I think you can get (new) replacement connectors in the 'Help' section, or order them from the catalog, of most major part store chains
Reply
Old Nov 12, 2002 | 02:40 PM
  #7  
Guest
Guest
 
Posts: n/a
You can order new 'clips' from any decent parts store. I just got one a couple weeks ago.
Reply
Old Nov 13, 2002 | 03:00 PM
  #8  
c4boom's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: May 2002
Posts: 569
Likes: 0
From: concord New Hampshire
Car: 87 iroc and 88 k2500 tbi truck
Engine: l98 and lo5
Transmission: 700 r4's babby
thank you i will have to make some calls i dont like running with things not hooked up. and one last question dose any one know where there is a online wiring diagram
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dyno Don
Engine/Drivetrain/Suspension Parts for Sale
2
Jan 24, 2016 08:24 AM
WickedBowtie
Members Camaros
10
Sep 17, 2015 09:13 AM
TheTraut88
TPI
6
Sep 11, 2015 05:16 AM
TheTraut88
Engine/Drivetrain/Suspension Parts for Sale
1
Sep 7, 2015 05:22 PM




All times are GMT -5. The time now is 04:39 PM.