Hi,
I'm gonna be doing my first TPI swap. I'm swapping out my TBI for a TPI. I'm only swapping the intake to start off with. I'm gonna install the TPI on the 305 motor for now, just to get it running properly. I bought a complete Speed Density setup. It has the ECM, prom, wiring harness, sensors, 19# injectors, distrbutor, coil, throttle body, ect. It was off a 91 GTA. I'm doing this in a 92 RS. I was wondering if anybody could recommend a good book, website, ect. that details a swap. I looked at my harness and it's got battery terminals, fan relays, and being my first swap it's kinda overwhelming.........

Thanks

 

TPIS has a tpi swappers book that should be helpful

just to make sure that your spending your money wisely on their overpriced parts call them up and make sure it goes through what you need in their book. www.TPIS.com

 

I just did the swap, I went from TBI to Holley stealth ram using a SD harness. It was my first swap as well. It's not that hard, this message board has all the info you would need.