TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Anybody used a Stealthram with a stock Speed Density PROM?

Thread Tools
 
Search this Thread
 
Old 10-15-2003, 02:25 PM
  #1  
Supreme Member
Thread Starter
 
jamesbob02's Avatar
 
Join Date: Oct 2002
Location: Oklahoma City, OK
Posts: 1,042
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Z28
Engine: 357 TPI (L98)
Transmission: 700R4
Anybody used a Stealthram with a stock Speed Density PROM?

I know that with a title like that, I'm just asking to get flamed. However, let me say that I know its not gonna be optimal and I will PROM-tune it when I get a chance (lack of $$), so that stuff does not need to be said to me.

I'm just wondering how it worked out with just the stock chip (Speed Density only!) during the meantime, because I'm going to need to sell off my TPI to recoup the some of the cost of the Stealthram. Obviously, this means it will have to be on my motor, so I'd just like to know what to expect. The motor is stock other than that....stock cam and heads with headers/catback.

Thanks, and no flames please!
Old 10-15-2003, 11:23 PM
  #2  
Supreme Member
Thread Starter
 
jamesbob02's Avatar
 
Join Date: Oct 2002
Location: Oklahoma City, OK
Posts: 1,042
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Z28
Engine: 357 TPI (L98)
Transmission: 700R4
Anybody? Please?
Old 10-15-2003, 11:41 PM
  #3  
Supreme Member

iTrader: (10)
 
NufNuffZ28's Avatar
 
Join Date: Dec 2000
Location: NC
Posts: 1,901
Received 43 Likes on 30 Posts
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Did it on a friends car. Part Throttle was OK, but WOT was a little lean. Gain 1 1/2mph and 1 tenth in the 1/4. Put some fuel in the WOT and picked up another 1 1/2 mph and two full tenths.

It will work, just not much gain with the loss of torque low and not enough fuel up top.


Chris
Old 10-15-2003, 11:45 PM
  #4  
Supreme Member
Thread Starter
 
jamesbob02's Avatar
 
Join Date: Oct 2002
Location: Oklahoma City, OK
Posts: 1,042
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Z28
Engine: 357 TPI (L98)
Transmission: 700R4
Yeah I'm not really expecting gains, just wondering how it runs til I can get it tuned. How's it idle and throttle response?
Old 10-16-2003, 12:02 AM
  #5  
Supreme Member

iTrader: (10)
 
NufNuffZ28's Avatar
 
Join Date: Dec 2000
Location: NC
Posts: 1,901
Received 43 Likes on 30 Posts
Car: 1987 Iroc
Engine: 357 Single plane and a Ysi vortech
Transmission: T56
Axle/Gears: 3.50 9"
Idle was fine, throttle response was softer(not as good as with TPI)


Chris
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Azrael91966669
DIY PROM
25
06-20-2017 04:04 AM
Steve78LT
Tech / General Engine
4
02-24-2016 12:15 AM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
08-12-2015 03:41 PM
djmarch
DIY PROM
1
08-11-2015 10:22 AM
86Base
TPI
14
08-08-2015 01:34 PM



Quick Reply: Anybody used a Stealthram with a stock Speed Density PROM?



All times are GMT -5. The time now is 03:09 AM.