IS this coming from my Intake Temp Sensor?
Thread Starter
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
IS this coming from my Intake Temp Sensor?
Is this wiring harness coming from my intake air temp sensor? If it's not....does anyone know where the wires from the intake air temp sensor are? Thanks
Supreme Member
Joined: Jun 2001
Posts: 9,550
Likes: 4
From: Charleston, SC
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
umm... shoudnt be.... the intake air temp sensor tends to be attached to the air box up front......
athough you cant really see much but a plug from that pic.
athough you cant really see much but a plug from that pic.
Thread Starter
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
Originally posted by MrDude_1
umm... shoudnt be.... the intake air temp sensor tends to be attached to the air box up front......
athough you cant really see much but a plug from that pic.
umm... shoudnt be.... the intake air temp sensor tends to be attached to the air box up front......
athough you cant really see much but a plug from that pic.
are you talking about for the MAF set up? On the MAP set up....there is no plug that goes into the air box...
Supreme Member
Joined: Jun 2001
Posts: 9,550
Likes: 4
From: Charleston, SC
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
Originally posted by 84customZ28
are you talking about for the MAF set up? On the MAP set up....there is no plug that goes into the air box...
are you talking about for the MAF set up? On the MAP set up....there is no plug that goes into the air box...
im just talking every GM FI setup ive ever seen or messed with...
they all get the air temp from the air box...
that plug isnt even pointing towards the air at all...
Supreme Member
Joined: Jul 1999
Posts: 5,183
Likes: 42
From: Oakdale, Ca
Car: 89 IrocZ
Engine: L98-ish
Transmission: 700R4
Been a year or two since I had my intake off, but IIRC, my MAT is located in my plenum, as far as I know, SD cars are the same way.
Only MAT/IAT I know in the inlet tube are the "relocated" variety.
I think only the V6's had the IAT located in the air inlet tube stock.
IAT and MAT are pretty much the same beast...Manifold Air Temp sensor, and Intake Air Temp sensor...but for "tTech-Speak", probably not.
Only MAT/IAT I know in the inlet tube are the "relocated" variety.
I think only the V6's had the IAT located in the air inlet tube stock.
IAT and MAT are pretty much the same beast...Manifold Air Temp sensor, and Intake Air Temp sensor...but for "tTech-Speak", probably not.
Joined: Jan 2003
Posts: 255
Likes: 1
From: indiana
Car: 91 Z-28
Engine: 420 sbc
Transmission: T56
Axle/Gears: 12 bolt/4.10 gears
yes, thats the pigtail connector that connects the iat sensor to the wire harness, i relocated mine to the airbox and had to plug the extension into that.
Trending Topics
Thread Starter
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
i relocated mine to the airbox and had to plug the extension into that.
I've been thinking about doing that too
Thread Starter
Supreme Member
iTrader: (1)
Joined: Mar 2001
Posts: 4,226
Likes: 6
From: Chesterfield, Indiana
Car: 1991 Z28 Camaro
Engine: 5.7
Transmission: Jasper 700R4 Stage II
Axle/Gears: 3.23 For Now
yes, thats the pigtail connector that connects the iat sensor to the wire harness
do you happen to know which wire is the "hot" wire? There is a brown and a black wire....I was thinking that the brown was hot
Last edited by Sickness91Z28; Oct 27, 2003 at 11:29 PM.
Supreme Member
Joined: May 2002
Posts: 4,099
Likes: 2
Originally posted by 84customZ28
do you happen to know which wire is the "hot" wire? There is a brown and a black wire....I was thinking that the brown was hot
do you happen to know which wire is the "hot" wire? There is a brown and a black wire....I was thinking that the brown was hot
Junior Member
Joined: Jul 2006
Posts: 17
Likes: 0
Re: IS this coming from my Intake Temp Sensor?
I am having trouble getting spark on an 88 305 TPI TransAm. When I went to connect the Intake Air Temp sensor, the only thing I found that fit was on the coil. Now that doesn't sound right, I know but there is a two section connector and this pigtail from the IAT fit one half. I am speculating that is this picture shows the IAT connection I must have it wrong. Can you help?
Skip
Skip
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
Feb 3, 2019 12:21 AM
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
