hows my combo look (383)
Thread Starter
Supreme Member
iTrader: (9)
Joined: Sep 1999
Posts: 3,871
Likes: 24
From: Mass
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
hows my combo look (383)
Hows this combo look. What do you guys think for hp and should I think about any changes at all. This will be a street/strip motor. mainly street
383 all forged internals
10:1 CR
5.7 rods
Comp cams 224/230 .503/.510
AFR 190's 72CC
comp cams 1.5 roller rockers
HSR
stock TB(for now)
rest of mods are in sig.
also adding a 150hp nitrous setup to it
383 all forged internals
10:1 CR
5.7 rods
Comp cams 224/230 .503/.510
AFR 190's 72CC
comp cams 1.5 roller rockers
HSR
stock TB(for now)
rest of mods are in sig.
also adding a 150hp nitrous setup to it
Supreme Member
Joined: Sep 1999
Posts: 1,054
Likes: 0
From: Ohio, USA
Car: 2015 Camaro Z/28 & 2013 Super Bee
Engine: LS7 and 392 HEMI
Looks good to me. I'd probably go w/ a single pattern cam w/ the AFR's. Something around 232/232 or so with .550-.575" lift in a 383. But what you have there would work great too.
Thread
Thread Starter
Forum
Replies
Last Post
IMissMy86TA
Auto Detailing and Appearance
27
Aug 31, 2015 08:40 PM