I also like how you will not have to modify any fuel lines. It using the stock fuel rails is a plus for me. As soon as I buy this intake (if it works out well), it's heads and cam time.

 

Dunno if anyone has seen this or not: http://www.bbkperformance.com/news_item.php?nak=23

 

Winter 2008 and $700 according to that link.

 

List price is $700. So it should be readily available somewhere from $600 to $700.

 

I think i'll stick to my HSR, Holley got there **** together, the name speaks for itself, been around for years and years BBK just came on the sene, i wont jump on the band weagon just yet.

 

they should do a dyno test with a healthy lb9 (305 tpi) if they could gain 50hp and 50tq on that motor, i think lots would buy it. now they need to make a great set of equal length shorties too.. more than half the tpi motors out there are 305's.. food for thought bryan.

 

i like the dyno graph claims.. yeah it makes 50hp difference at 5000 rpms, but its only a near 10hp peak difference. And that stocker dyno'd only 200 hp at like a really low 3900 rpms. Should be closer to 4400-4500 and 210 whp for a good condition stocker L98. I assume they used a 350 based on the numbers

BUT it did show good breathing out to 4700 rpms on a stock 88 L98. thats not too bad. Shows good potential

What surprises me is that the stock TPI made more torque below 3500 rpms and a pretty good difference to boot. I didnt expect such a big difference.

 

That very well may have been the dyno from a 305. They don't actually mention L98 anywhere. All they say is "88 IROC".

 

You might want to Google "Holley Bankruptcy".......





The dyno tests were performed on a 350 that was beat down pretty hard.

I figure, if I got 50 H.P. out of an intake on that POS, then there must be a good potential for a better intake on those cars...

I'm not sure on the nicknames yet. I came up with "SSI-R" for the 5.0L race intake, (shown in this thread) but this one.... I was thinking "BBK TPI" would suffice. It's pretty straight-forward

 

UTPI
Ultimate Tuned Port Injection

Since you would probably know better than the marketing department, is this acctually going to be available in 5 or 6 months?

 

Say Brian! Is there anyway to give us the flow numbers of the manifold an or the tubes internal diameter size?

What happen to $399.00 price as avertised? How about meeting it half way?

 

TPI AAAARRRRR!

I'll put a pirate flag on it....

It should be available at the end of the year.

 

$399.99 was a very rough estimate that was drawn up at the time of the original idea. I'm sorry, but I didn't post that price.

Boss says the 3 castings wil cost a little more than that just to get them here before machining.

As with all of BBK products, the price will be very competitive with other the options that are available on the market.

If we were going to do F-body shorties, we would do our own jig....Should we stop working on the TPI intake stuff and get working on some shorties right away?

 

Yeah, and maybe some performance cupholders

Glad to see there's a date, and the price doesn't sting THAT much.

 

No need for sarcasm now.....

 

Definately not! I had begun to write off this intake, but now my hopes are alive & well once again. If it's available around October of this year - that will be perfect for me. I can sell off the stuff I've bought in the meantime and set it aside for the BBK unit. It will save me a lot of work/time/money.

 

All of my questions was just to put a little bug in BBK's ears.

You didn't answer my first question Brian!

 

Does show a potential. a L98 making barely 200hp at the wheels at 3900 rpms stock is pretty beat, and yet you still made some power. That shows good potential in my book. Stock TPi is NOT adequate for 305's let alone a 350+ inch motor

 

should show a much bigger gain on my engine--with the cam and heads ect I have

Sorry I can't remember--is this going to bolt up to Vortec heads??
(PLEASE!!)

 

probly not, its gotta have two versions to bolt to vortec ports

 

Does this intake have a provision for a cold start injector? I can't tell in the pics

 

we should see a flood of stock TPI and SLP runners on E-bay after this intake comes out, as far as looks, $700, I'll save alittle more money and get the superram

 

Hey bryan,
is the BBK TPI intake setup going to be available for the 1987 Tpi 350? What year's is the intake going to work on?

 

Man..................who care about Bankruptcy, i am pretty sure the owners of Holley still has more money then you and me put together, we talking about a product that seems to be a Ghost and the HSR, which we know is real.

 

.............

 

Hey are we going to get a GP for thirdgen?

 

I second that. That would tie together a good manufacture to customer relationship right there.

Kevin

 

Definatly a good idea

 

I am lost what's a GP

 

Group Price

 

or Group Purchase...where you get a discounted group price

 

WOW, I would definitely jump on the GP bandwagon.

 

LOL...Am I the only one who caught this?

I think the Dyno Don header option is the best one, especially since it is here today for a very competitive price.

NO...BBK shouldn't be diverting any resources away from finishing this intake!

Looks pretty good...

 

I remember reading somewhere on this thread concerns that the lid on the intake might not stand up well to significant positive pressure.

Bryan, what do you suspect / believe / have tested the boost limit of the intake to be?

 

I've got a new one for ya. I installed my edelbrock strut tower the other day and was just admiring it and all the sudden panic struck! Will the BBK TPI system fit under my new strut tower?!?

 

I finally had some time to look through my mail yesterday and saw there is a blurb about this intake on page 22 of the June issue of Super Chevy. Unfortunately they didn't even use a thumbnail. I am guessing it is because it is more late reporting on the industry show, and the person submitting it likely didn't want to use the photo he took knowing that it was still a project under development at the time of the show. If it was a BBK press release, I am surprised they didn't give the pic in the pack.

 

We will have to wait and see on the strut tower brace issue. I know of at least one that is thinner in the area going over the plenum.

 

I sure hope it clears, I would hate to have to remove it after I drilled all those holes..

Wheres bryan when you need a heigth dimension

 

I think the look of it is quite decent. Reminds me of the 3100/3400 intake on the FWD cars.

After reading a thread on all the differences between the years of TPI. It would be very interesting to see how it covers all years. EGR, CSI, TB's, MAP. Plus different heads and vortecs that this setup is often put on.

 

It clears a corvette hood, so it should be low enough to clear most strut tower braces.

 

For the guys worried about height issues... it doesnt look any taller than a stock TPI, maybe shorter? You should be fine.

I think at $699 they are sort of missing the boat. That's well into HSR territory, and the HSR probably performs a lot better up top.

 

Even if it is into HSR territory and price... us out here in Cali cant use HSR

 

Very true, it definitely has its pros versus HSR.

its got emissions, it fits a vette, and firebird owners dont have to hack their hoods to make it fit.

 

We can't??? ;-) -Bill

 

Well... LEGALLY we cant use it... and still be street legal...

 

Bill

 

glad to see a date. may have to finally build an engine to sit this on.

 

All it says on the web site is Winter of 08', and still no price. I'm starting to have my doubts it will be available this year.

 

winter 08 and $699 thats what their site is going with right now. you and i may be able to pick one up in deland if the release gets pushed back farther. they would be done with the new distribution center by then.

 

They're going to have a distribution center in Deland? Oh I can't wait