TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Wire harness connector issue

Thread Tools
 
Search this Thread
 
Old Aug 3, 2005 | 11:51 PM
  #1  
Dioak88GTA's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2003
Posts: 28
Likes: 0
From: Downriver, MI
Car: 88 Trans Am GTA
Engine: 5.0 TPI
Transmission: 700R-4
Wire harness connector issue

i've got a question for ne one that can give me an answer...does ne one know where i could get gm engine harness connects by themselves? does ne one make those anymore?....i know i could get a junkyard car but the junkyards around my are SUCK! never any 3rd gens.. ne ways i just need to find a place that sells some connectors. ne body got a clue it would help out a lot! thx
Reply
Old Aug 6, 2005 | 04:56 PM
  #2  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,651
Likes: 309
Pep Boys, AutoZone, Advanace Auto, and their clones may have them. Rockauto.com has them. Any real parts store that reps the Standard Motor Products line has them or can order them for you. They are still available.
Reply
Old Aug 7, 2005 | 12:46 PM
  #3  
Ollie8974's Avatar
Junior Member
 
Joined: Jul 2005
Posts: 49
Likes: 1
From: Lynnwood Wa.
Car: 1979 Zcode TA
Engine: 220hp 400ci Building a EFI 455
Transmission: 4 speed
On the same subject, what about the pins to repair a wire that is broken off right behind the plug. I have a TPS and a IAC plug, Standard Motor Parts number S 551 and S 619 that I need some repair pins. The catalouge show the plugs and pins but it does not indicate what pins go to which plugs.
Reply
Old Aug 8, 2005 | 10:24 AM
  #4  
92blue's Avatar
Former Sponsor
iTrader: (1)
 
Joined: Feb 2002
Posts: 1,081
Likes: 3
From: Florida
Car: 1992 Camaro RS
Engine: Yet another 350 TPI
Transmission: Borg Warner 6 spd
Axle/Gears: 3.73
The TPS and IAC connectors both use the same pins. They are weatherpack male terminals.
Reply
Old Aug 8, 2005 | 02:31 PM
  #5  
Ollie8974's Avatar
Junior Member
 
Joined: Jul 2005
Posts: 49
Likes: 1
From: Lynnwood Wa.
Car: 1979 Zcode TA
Engine: 220hp 400ci Building a EFI 455
Transmission: 4 speed
I dont have a problem with the weather pack pins. This is the style plug I need replacment pins for. Standard Motor Products IAC part number S 619
Attached Thumbnails Wire harness connector issue-s551.jpg  

Last edited by Ollie8974; Aug 8, 2005 at 02:35 PM.
Reply
Old Aug 8, 2005 | 02:32 PM
  #6  
Ollie8974's Avatar
Junior Member
 
Joined: Jul 2005
Posts: 49
Likes: 1
From: Lynnwood Wa.
Car: 1979 Zcode TA
Engine: 220hp 400ci Building a EFI 455
Transmission: 4 speed
And this style TPS. Standard Motor Products part number S 551
Attached Thumbnails Wire harness connector issue-s619.jpg  
Reply
Old Aug 8, 2005 | 08:05 PM
  #7  
88TPI406GTA's Avatar
Supreme Member
 
Joined: Sep 2001
Posts: 1,355
Likes: 1
From: MN
Car: 2009 Pontiac G8 GXP
Engine: LS3
Transmission: 6L80E
Axle/Gears: 3.27
What are those from? They don't look like a TPI TPS or IAC plug to me...
Reply
Old Aug 9, 2005 | 01:48 AM
  #8  
Ollie8974's Avatar
Junior Member
 
Joined: Jul 2005
Posts: 49
Likes: 1
From: Lynnwood Wa.
Car: 1979 Zcode TA
Engine: 220hp 400ci Building a EFI 455
Transmission: 4 speed
Go to http://www.smpcorp.com/

parts lookup /part number lookup for S-551 and S-619 for a list of cars

Last edited by Ollie8974; Aug 9, 2005 at 01:54 AM.
Reply
Old Aug 9, 2005 | 11:23 AM
  #9  
S10Wildside's Avatar
TGO Supporter
 
Joined: Nov 1999
Posts: 1,000
Likes: 7
From: Pennsylvania
Originally posted by 88TPI406GTA
What are those from? They don't look like a TPI TPS or IAC plug to me...
Those connectors are used with the newer V6 engines and a lot of applications beyond 1990. The terminals used in the TPS connector pictured above can be used in the IAC connector pictured. The IAC connector pictured (also the same connector as the TPI small cap distributor) had a redesign that put four slots in the bottom and different terminals were used. Before the redesign, the connector used the TPS (pictured) style terminals. However, TPS style terminals can be used in the newer style IAC connector.

I build new wiring harnesses and have these pieces. I can't advertise on these boards, but you can contact me privately if you need some connectors/terminals.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
crt454
Interior Parts Wanted
10
Jun 23, 2017 02:25 PM
TheJoeY88
Electronics
19
Dec 31, 2016 07:30 PM
Ikes 91Z
LTX and LSX
21
Dec 9, 2015 03:49 PM
Reddeath210
Firebirds for Sale
14
Oct 6, 2015 08:20 AM
stalkier
Electronics
0
Aug 13, 2015 12:59 PM




All times are GMT -5. The time now is 08:40 AM.