305 to 383 TPI

Subscribe
Feb 15, 2006 | 12:11 PM
  #1  
Im getting rid of my 305 TPI and putting in a 383 stroker. I would like to reuse my TPI if i can, but would it be a better idea to use something else?
Reply 0
Feb 15, 2006 | 04:19 PM
  #2  
A stock TPI systems barely flows adequate air to a 350ci motor. I would at least get a high flow base and runners.

1. High flow base runners = good street combo
2. Superram setup = good street/strip combo
3. Miniram set = better street/strip setup.

I'm sure there are other opinons, this is just my .02

(I only say the minram is better because it's revs a little higher then the superram)
Reply 0
Feb 15, 2006 | 08:00 PM
  #3  
You could potentially reuse your TPI intake and just get higher lb/hr injectors, but like it was said above, the stock TPI unit just doesnt flow enough air. It can barely support a stock 350.
Reply 0
Subscribe