Cold start injector Ohms

Reply Subscribe

Thread Tools

Search this Thread

Apr 13, 2006 | 07:52 PM

TABBOO

Thread Starter

Member

Joined: Jul 2003

Posts: 249

Likes: 38

From: CANTON, OHIO

Car: 87 T/A

Engine: 305 TPI

Transmission: 700R4

Cold start injector Ohms

Anybody know what I should have for cold start injector ohms? I checked it & I get 4.1 Ohms. Is this good or should it read higher like the other 8, I got 16.5 to 17 on those. 87 305 TPI.

Apr 26, 2006 | 09:54 AM

Vader

Moderator

Joined: Jan 2000

Posts: 19,653

Likes: 309

4.1 is good.

Apr 27, 2006 | 08:40 AM

TABBOO

Thread Starter

Member

Joined: Jul 2003

Posts: 249

Likes: 38

From: CANTON, OHIO

Car: 87 T/A

Engine: 305 TPI

Transmission: 700R4

Thanks I talked to rich at cruzin performance & he said it sounds like the injectors might be leaking> I will get a fuel pressure guage & check leakdown als will buy node light to check if injectors getting signal. The car runs after hard start but I want to see if injectors are firing as soon as I try to start the car. I will also check to see if plugs are firing right away. I want to make sure it's not something simple like a sensor (cts) or a relay. I will also check for gas in the fuel regulator. I hope this will cover all the bases!!!

Apr 29, 2006 | 08:54 PM

TABBOO

Thread Starter

Member

Joined: Jul 2003

Posts: 249

Likes: 38

From: CANTON, OHIO

Car: 87 T/A

Engine: 305 TPI

Transmission: 700R4

Thanks for the help. Worked on it yesterday and am pretty sure cold start sensor is messed up. Starts fine if cold start is disabled. Will replace sensor & hope that it was that easy!!!!