idling problem with 87 tpi 350 iroc
idling problem with 87 tpi 350 iroc
i have a 87 iroc 350 tpi and it idles to low. it's got a brand new tps, iac, plugs, wires, computer, chip, maf, etc. the computer tells the car to idle at 550 so in park the car stalls, in gear it usually stays running but the idle fluctuates around 600 -650. engine was rebuilt before i got the car so it's possible the cam isn't stock. anyone have any idea what the problem could be?
yep checked the tps and the iac and properly adjusted them ... did find out however that one of my injectors seems to be bad. I'm gonna get a new set of accel 24# injectors and hopefully thats where the problem is ... i guess i'll find out next week.
Member
iTrader: (1)
Joined: Jul 2005
Posts: 275
Likes: 0
From: edge of the map
Car: red one
Engine: on the floor
Transmission: next to engine
Axle/Gears: the ones that turn
Originally Posted by 87iroc350conn
yep checked the tps and the iac and properly adjusted them ... did find out however that one of my injectors seems to be bad. I'm gonna get a new set of accel 24# injectors and hopefully thats where the problem is ... i guess i'll find out next week.
Member
Joined: Aug 1999
Posts: 233
Likes: 0
From: New Britain Ct. USA
Car: 89GTA
Engine: 355TPI Edelbrock heads, base. SLP r
Transmission: TCI streetfighter 700r4
Axle/Gears: B/W3:27
vacume leaks. especially around runners at the base. once you get it idling. spray carb cleaner at gaskets and see if idle changes. just one thing to check
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM





