will an 87 tpi fuel rail work on a 91 z
Thread Starter
Member
Joined: Jun 2006
Posts: 463
Likes: 9
From: Milford, OH
Car: 91 Z28 - using 87 electricals
Engine: 383 HSR EBL
Transmission: 700R4 - Stage 3 Fixed Pressure
Axle/Gears: GM 3.08 POSI
will an 87 tpi fuel rail work on a 91 z
just like the title says will it?
if not are there any mods to make it work.
im asking cause im seling a set to a guy that needs one for his z.
if not are there any mods to make it work.
im asking cause im seling a set to a guy that needs one for his z.
Supreme Member
iTrader: (2)
Joined: Nov 2003
Posts: 3,400
Likes: 0
From: Antelope, CA
Car: 89 IrocZ/17 LS 1LE
Engine: 383/LGX
Transmission: 400/TR-3160
Axle/Gears: 3.08/3.27
yes and no
87 still had the cold start valve(AKA 9th injector). If I remember right you can just unscrew the valve feed line from the end of the rail. so he would have to seal the end of the rail where the feed line goes
87 still had the cold start valve(AKA 9th injector). If I remember right you can just unscrew the valve feed line from the end of the rail. so he would have to seal the end of the rail where the feed line goes
Thread Starter
Member
Joined: Jun 2006
Posts: 463
Likes: 9
From: Milford, OH
Car: 91 Z28 - using 87 electricals
Engine: 383 HSR EBL
Transmission: 700R4 - Stage 3 Fixed Pressure
Axle/Gears: GM 3.08 POSI
what if he just left the injector where it is but didnt plug it into anything whould that still suffice.
Thread
Thread Starter
Forum
Replies
Last Post
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 25, 2015 11:49 PM