How much air to these throttle bodies shift?
Thread Starter
Moderator
Joined: Apr 2000
Posts: 2,337
Likes: 2
Car: 87 IROC
Engine: modded LB9
Transmission: Pro Built 700R4
How much air to these throttle bodies shift?
I'm trying to find out how much air the stock 48mm and a 52mm throttle body would shift. I have been able to find out that a 58mm unit would do about 1000cfm. Anyone know the rest?
Also, is it right that an air foil will add an extra 36 cfm of airflow?
Thanks for the help
Rob
------------------
1987 IROC-Z Auto (LB9)
Black/grey with the stance of a streetfighter
Mods
Custom exhaust. 4 Inch pipe from the headders all the way back to a single muffler at the rear. No Cat.
Future mods:
K&Ns
RAM Air
New Underdrive pulleys-either March performance pulleys or Auto Specialties Performance
Air foil
Also, is it right that an air foil will add an extra 36 cfm of airflow?
Thanks for the help
Rob
------------------
1987 IROC-Z Auto (LB9)
Black/grey with the stance of a streetfighter
Mods
Custom exhaust. 4 Inch pipe from the headders all the way back to a single muffler at the rear. No Cat.
Future mods:
K&Ns
RAM Air
New Underdrive pulleys-either March performance pulleys or Auto Specialties Performance
Air foil
Joined: Jul 1999
Posts: 10,950
Likes: 26
From: Orange, SoCal
Car: 1990 Pontiac Trans Am
Engine: 355 TPI siamesed runners
Transmission: Tremec T56
Axle/Gears: 12-Bolt 3.73
The 48mm TB flows about 600 or 650cfm. The 52mm is around 700 or 750cfm.
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
------------------
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
mdtoren
Tech / General Engine
0
Aug 16, 2015 05:45 PM