Plenum and Runner Interchangability Between Years.
#1
Supreme Member
Thread Starter
iTrader: (1)
Join Date: Jan 2001
Location: Quakertown, PA
Posts: 2,117
Likes: 0
Received 18 Likes
on
7 Posts
Car: 1992 Camaro Z28 Convertible Z03
Engine: 383 SuperRam
Transmission: 700R4
Axle/Gears: 2.73
Plenum and Runner Interchangability Between Years.
Are plenums and runners interchangable from an '86 TPI 305 and a '91 L98. I just put a '91 L98 in my car and while Im driving my car, I can polish and port my plenum and runners from the 86 intake then just switch the two.
Maybe then I'd polish the '91 and sell it.
------------------
Fire fighting, Scuba Diving, and Fast cars.....Does life get any more exciting
'86 TPi T/A L98
Stuff on Order:
Ram Air Hood
4th gen Spoiler
Borla exhaust
Sub Frame Connectors
STB
and a bunch of other stuff
Q?-Does Prowler orange sound like it will look good on my T/A?
AOL Screen Name, Madbiker1
Maybe then I'd polish the '91 and sell it.
------------------
Fire fighting, Scuba Diving, and Fast cars.....Does life get any more exciting
'86 TPi T/A L98
Stuff on Order:
Ram Air Hood
4th gen Spoiler
Borla exhaust
Sub Frame Connectors
STB
and a bunch of other stuff
Q?-Does Prowler orange sound like it will look good on my T/A?
AOL Screen Name, Madbiker1
#3
Supreme Member
iTrader: (1)
Join Date: Dec 2000
Location: Cincinnati,Ohio
Posts: 2,341
Received 151 Likes
on
111 Posts
Car: 1991 BandittII Firebird
Engine: 5.7 HSR
Transmission: 700R4
Axle/Gears: 3.27 9 bolt
84-88-these have a cold start injector that is attached to the driver side runner and has a fuel line that runs from the cold start injector(9th injector)to the back of the driver side fuel rail.these two holes can be plugged for use in later model cars
------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt II
http://www.street-dawg-racing.cityslide.com
http://discussion-board.com/GreaterC...dyAssociation/
http://www.cincyspeed.com/
------------------
1991 banditt2 #130 of 600
Project 350 TPI Banditt II
http://www.street-dawg-racing.cityslide.com
http://discussion-board.com/GreaterC...dyAssociation/
http://www.cincyspeed.com/
#4
Member
Join Date: Jul 1999
Location: Norfolk, VA
Posts: 421
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Trans Am
Engine: 305 TPI
Transmission: 700R4
Bandit: I you mean 85-88, there was no TPI in 84.
You will also need to drill a port on the back of the passenger side of the plenum for the MAP sensor that the 90-92 TPI uses.
------------------
Kevin Irving
85 Trans Am WS-6, 305 TPI, custom burned '86 PROM with '87 "165"ECM, Accel Supercoil & 8.8 Wires, Rapidfire #2 @ .055", MSD 6AL, 1.6:1 Roller tipped rockers, Homemade AFPR, K&N cone, no airbox, Aluminum Driveshaft, Wonderbar, TB Coolant Bypass, Ported Plenum, Descreened MAF, Syclone Fuel Pump, JET Airfoil, Mobil 1 synth in all but transmission.
http://www.geocities.com/transam85tpi/
You will also need to drill a port on the back of the passenger side of the plenum for the MAP sensor that the 90-92 TPI uses.
------------------
Kevin Irving
85 Trans Am WS-6, 305 TPI, custom burned '86 PROM with '87 "165"ECM, Accel Supercoil & 8.8 Wires, Rapidfire #2 @ .055", MSD 6AL, 1.6:1 Roller tipped rockers, Homemade AFPR, K&N cone, no airbox, Aluminum Driveshaft, Wonderbar, TB Coolant Bypass, Ported Plenum, Descreened MAF, Syclone Fuel Pump, JET Airfoil, Mobil 1 synth in all but transmission.
http://www.geocities.com/transam85tpi/
Thread
Thread Starter
Forum
Replies
Last Post
Royal_Z
Engine/Drivetrain/Suspension Parts for Sale
4
09-30-2015 08:45 PM