TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

EGR Valve block plate?

Thread Tools
 
Search this Thread
 
Old May 24, 2009 | 07:36 PM
  #1  
caid1985's Avatar
Thread Starter
Junior Member
 
Joined: Feb 2008
Posts: 18
Likes: 0
From: Atlanta, GA
Car: 1986 IROC-Z
Engine: 350 ci
Transmission: 700R4
EGR Valve block plate?

My 86 IROC TPI has a block plate over where the EGR valve goes...is this detrimental to the car or no big deal. Im having a nasty bug and I wonder if its related. After running for about 30 to 40 minutes once I come to a stop and let it idle it while often try to die like its outta fuel, and you can stop it, and once it dies it won't restart until its sit and cooled down, then it fires back up, so it seems something is getting hot.
Reply
Old May 24, 2009 | 10:03 PM
  #2  
Guest
Guest
 
Posts: n/a
Re: EGR Valve block plate?

Its not the EGR (or lack of) causing that. I'd start with cleaning the throttle body with some throttle body cleaner and see where that takes you.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
13
Sep 4, 2015 07:57 AM
Out-Cast
Exhaust
7
Sep 3, 2015 09:05 PM
Out-Cast
Tech / General Engine
5
Aug 17, 2015 10:57 AM
Zachattack0925
Transmissions and Drivetrain
4
Aug 12, 2015 09:52 PM




All times are GMT -5. The time now is 01:05 AM.