TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Check engine light on Engine Stumbling

Thread Tools
 
Search this Thread
 
Old Nov 10, 2009 | 09:24 AM
  #1  
aharvel50's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2009
Posts: 5
Likes: 0
Check engine light on Engine Stumbling

Hey guys I need some help im no where near new o camaros but I am to fuel injection. I have a 1991 z28 w/ a 305 TPI, The check engine light has recently come on and the computer is spitting a code 44. The car will run and idle if you listen closely you canr hear the "misfire" in the exhaust and the car will stumble not much but slightly at partial throttle. the car runs like a champ though whenever you stomp it. The injectors and o2 sensors have been replaced. The code from what I can tell can indicate low fuel pressure, bad o2 sensors, bad, map sensor, or a bad ECM. oh also the car has no trouble starting. Any and all help would be appreciated because im at a loss. Thanks
Reply
Old Nov 11, 2009 | 07:39 AM
  #2  
Karasawa's Avatar
Junior Member
 
Joined: Sep 2006
Posts: 18
Likes: 0
From: South Carolina
Car: KITT
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 2.73 one wheel wonder
Re: Check engine light on Engine Stumbling

sounds like a compromised plug wire, check your wires, at night with no light open the hood with it running, you'll see it if there is a bad wire. The engine light could be triggered by the o2 sensor throwing a fit because the misfire. could even be timing slightly off, just a hunch
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wade787b
TPI
2
Sep 29, 2015 01:15 PM
Jae992
TBI
3
Aug 27, 2015 09:07 AM
bradleydeanuhl
DFI and ECM
4
Aug 12, 2015 11:48 AM
Omega
Interior Parts for Sale
2
Aug 10, 2015 12:46 PM




All times are GMT -5. The time now is 09:01 AM.