Ok so I'm lookin to c if this combo will work good b4 I buy the stuff to finish. So the motor or a 383 stroker runnin about 10.7 to 1 sportsman two heads elderbrock performer cam with 539 548 lift and 298 308 duration or close to that duration full roller setup and my question was if with a stealth ram setup on top could it b tuned to get good power out of this setup or should I just keep it carbed and if fi will work who would b the best company to go with for the tuning I was thinking fast chips.com

 

Decide yourself
http://xtremecarzone.com.au/index.php?showtopic=386

 

That's awesome but they r runnin a aftermarket fi system not a gm fi

 

In that comparison, there isn't much that an aftermarket EFI system can do that a GM can't.

 

Not much difference between a accel DFI and a 90-92 GM SD setup..

 

Well I'd b runnin a 89 maf

 

Even better.
I'm using my stock 89 formula 350 computer to run my 400 stroker with a solid roller cam and afr 235s. I'm fairly sure you'll be ok

 

Who did u get to program ur chip and I have a set of 30lb injectors do u think they will b big enough