Third Generation F-Body Message Boards

TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

Anyone work at dealer or know someone who does?

Thread Tools
 
Search this Thread
 
Old Aug 11, 2013 | 01:26 AM
Share
  #1  
MrPackstin's Avatar
MrPackstin
Thread Starter
Member
10 Year Member
Liked
Loved
iTrader: (9)
 
Joined: Dec 2012
Posts: 407
Likes: 10
From: Clarksville,TN
Car: 1989 GTA
Engine: 5.7 w/Paxton
Transmission: 700R4
Axle/Gears: 3.27
Anyone work at dealer or know someone who does?
1989 MAF Power and Burn-off Relays. Wondering if anyone has access to the part numbers from GM. My car has 14089936 for both. I THINK this IS the correct for MAF power, but burn-off circuit looks different. Need to verify whether or not this is correct. Appreciate any help.
Last edited by MrPackstin; Aug 12, 2013 at 03:00 PM.
Reply
0
Old Aug 12, 2013 | 03:00 PM
Share
  #2  
MrPackstin's Avatar
MrPackstin
Thread Starter
Member
10 Year Member
Liked
Loved
iTrader: (9)
 
Joined: Dec 2012
Posts: 407
Likes: 10
From: Clarksville,TN
Car: 1989 GTA
Engine: 5.7 w/Paxton
Transmission: 700R4
Axle/Gears: 3.27
Re: Anyone work at dealer or know someone who does?
TTT
Reply
0
Old Aug 13, 2013 | 08:42 AM
Share
  #3  
rusty vango's Avatar
rusty vango
Supreme Member
 
Joined: Jun 2011
Posts: 2,036
Likes: 5
From: knoxville tn
Car: 86 IROC
Engine: 5.0 TPI
Transmission: 700-R-4
Axle/Gears: 2.73 open
Re: Anyone work at dealer or know someone who does?
Originally Posted by MrPackstin
1989 MAF Power and Burn-off Relays. Wondering if anyone has access to the part numbers from GM. My car has 14089936 for both. I THINK this IS the correct for MAF power, but burn-off circuit looks different. Need to verify whether or not this is correct. Appreciate any help.
NAPA has these relays,BUT you have to check them for being correct for the particular app.as in the relay I have for my burnoff is for a caddilac. on the side of the relay should be a schematic of whats inside it.and that is what matters, correct circuitry
Reply
0
Old Aug 13, 2013 | 01:48 PM
Share
  #4  
MrPackstin's Avatar
MrPackstin
Thread Starter
Member
10 Year Member
Liked
Loved
iTrader: (9)
 
Joined: Dec 2012
Posts: 407
Likes: 10
From: Clarksville,TN
Car: 1989 GTA
Engine: 5.7 w/Paxton
Transmission: 700R4
Axle/Gears: 3.27
Re: Anyone work at dealer or know someone who does?
Originally Posted by rusty vango
NAPA has these relays,BUT you have to check them for being correct for the particular app.as in the relay I have for my burnoff is for a caddilac. on the side of the relay should be a schematic of whats inside it.and that is what matters, correct circuitry
Rusty, What is the part number on your burn-off relay?
Reply
0
Old Aug 13, 2013 | 02:12 PM
Share
  #5  
Tuned Performance's Avatar
Tuned Performance
Sponsor
20 Year Member
Community Builder
Community Influencer
Community Favorite
iTrader: (94)
 
Joined: Dec 2004
Posts: 16,751
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Anyone work at dealer or know someone who does?
The maf relays would be different part numbers IIRC 88-89 use the weather pack seal
14089936 acdelco 15-8240
Reply
0
Old Aug 13, 2013 | 02:36 PM
Share
  #6  
MrPackstin's Avatar
MrPackstin
Thread Starter
Member
10 Year Member
Liked
Loved
iTrader: (9)
 
Joined: Dec 2012
Posts: 407
Likes: 10
From: Clarksville,TN
Car: 1989 GTA
Engine: 5.7 w/Paxton
Transmission: 700R4
Axle/Gears: 3.27
Re: Anyone work at dealer or know someone who does?
Originally Posted by Tuned Performance
The maf relays would be different part numbers IIRC 88-89 use the weather pack seal
14089936 acdelco 15-8240

Yes, Rusty should have different types-older car/style...my bad.
Last edited by MrPackstin; Aug 13, 2013 at 02:43 PM.
Reply
0
Old Aug 20, 2013 | 01:46 AM
Share
  #7  
MrPackstin's Avatar
MrPackstin
Thread Starter
Member
10 Year Member
Liked
Loved
iTrader: (9)
 
Joined: Dec 2012
Posts: 407
Likes: 10
From: Clarksville,TN
Car: 1989 GTA
Engine: 5.7 w/Paxton
Transmission: 700R4
Axle/Gears: 3.27
Re: Anyone work at dealer or know someone who does?
I believe the MAF power is 14089936 and the burn-off is 13103304. Have to check with the dealer I suppose.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
350 and 305
Jake_92RS
Tech / General Engine
8
Jan 28, 2020 10:37 PM
FORMULA 350 prices spiking?
okfoz
History / Originality
195
Mar 9, 2017 02:35 PM
Two exterior light problems - Please help
Fronzizzle
Electronics
3
Aug 17, 2015 02:52 PM
What in the world
Leggman1
Brakes
6
Aug 12, 2015 08:39 PM
Alternator Fusible Link/Circuit Breaker triggers when A/C is turned on
db057
TBI
10
Aug 11, 2015 10:11 PM
Back to Subforum
TPI
View Next Unread
Port Trick Flow 175cc heads




Advanced Search

All times are GMT -5. The time now is 08:42 AM.